MOT History from tests of petrol ROVER 100s year 1970

Review the list of common ROVER 100 failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history

Pass percent:61.11%

(The average a petrol ROVER 100 year 1970 passes without issue)

Based on:18 MOT Tests

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Brakes imbalanced across an axle	2
Nearside Headlamp not working on main beam \|1.7.5a\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Windscreen has damage	1
Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Driver`s seat insecure \|6.2.A.1\|	1
Rear parking brake recording little or no effort	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Indicator switch insecure \|1.4.A.1\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Horn not working \|1.6.2a\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Centre Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Torsion bar attachment bracket corroded and seriously weakened \|2.4.E.4c\|	1
Offside Front Torsion bar attachment bracket corroded and seriously weakened \|2.4.E.4c\|	1
Nearside Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Inner Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Driver`s seat insecure \|6.2.A.1\|	1
Offside Rear Leaf spring saddle is moving relative to the spring \|2.4.B.7a\|	1
Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Windscreen wiper does not clear the windscreen effectively	1
Rear brake binding	1
Indicator tell tale inoperative \|1.4.A.2a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Registration plate lamp issues	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Brakes imbalanced across an axle	2
Nearside Headlamp not working on main beam \|1.7.5a\|	2
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Windscreen has damage	1
Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Driver`s seat insecure \|6.2.A.1\|	1
Rear parking brake recording little or no effort	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Indicator switch insecure \|1.4.A.1\|	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Horn not working \|1.6.2a\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Centre Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Torsion bar attachment bracket corroded and seriously weakened \|2.4.E.4c\|	1
Offside Front Torsion bar attachment bracket corroded and seriously weakened \|2.4.E.4c\|	1
Nearside Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Inner Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Driver`s seat insecure \|6.2.A.1\|	1
Offside Rear Leaf spring saddle is moving relative to the spring \|2.4.B.7a\|	1
Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Windscreen wiper does not clear the windscreen effectively	1
Rear brake binding	1
Indicator tell tale inoperative \|1.4.A.2a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Registration plate lamp issues	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

MOT History from tests of petrol ROVER 100s year 1970

Find us on Facebook