MOT History from tests of petrol ROLLS ROYCE SILVERs year 1955

Review the list of common ROLLS ROYCE SILVER failures below or to perform a specific mot history check on your ROLLS ROYCE then use our popular KnowYourCar service

mot history

Pass percent:90.78%

(The average a petrol ROLLS ROYCE SILVER year 1955 passes without issue)

Based on:206 MOT Tests

Most common failures	No# failures
Service brake: efficiency below requirements \|3.7.B.7\|	4
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Offside Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	2
Headlamp aim not tested \|1.8.A.1c\|	2
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Offside Front Fluid suspension leaking \|2.4.D.2\|	1
Offside Intermediate drop arm insecure \|2.2.B.1a\|	1
Offside Front Brake performance not tested \|3.7.A.1\|	1
Nearside Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	1
Brake master cylinder leaking hydraulic fluid \|3.6.G.1f\|	1
Offside Front Steering arm has relative movement at its fixings \|2.2.B.1h\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front All position lamps not working \|1.1.A.3b\|	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams \|1.7.4b\|	1
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	1
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	1
Nearside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Service brake is causing the vehicle to swerve to the nearside \|3.7.C.2\|	1
Horn not working \|1.6.2a\|	1
Nearside Front Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside Semaphore indicator arm does not extend smoothly \|1.4.C.1a\|	1
Nearside Semaphore indicator arm does not retract smoothly \|1.4.C.1a\|	1
Front Headlamp not working on dipped beam \|1.7.5a\|	1
Rear Brake pivot excessively worn and seriously weakened \|3.5.1e\|	1
Ball joint has excessive play \|2.2.B.1f\|	1
Offside Ball joint has excessive play \|2.2.B.1f\|	1
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Brake performance not tested \|3.7.A.1\|	1
Nearside Front Anti-roll bar has excessive play in a pin/bush \|2.4.G.2\|	1
Mechanical brake component has restricted free movement	1
Offside Front Brake back plate\|s\| securing device loose \|3.5.1j\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Service brake: efficiency below requirements \|3.7.B.7\|	4
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Offside Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	2
Headlamp aim not tested \|1.8.A.1c\|	2
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Direction indicators not working \|1.4.A.2c\|	1
Offside Front Fluid suspension leaking \|2.4.D.2\|	1
Offside Intermediate drop arm insecure \|2.2.B.1a\|	1
Offside Front Brake performance not tested \|3.7.A.1\|	1
Nearside Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	1
Brake master cylinder leaking hydraulic fluid \|3.6.G.1f\|	1
Offside Front Steering arm has relative movement at its fixings \|2.2.B.1h\|	1
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front All position lamps not working \|1.1.A.3b\|	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams \|1.7.4b\|	1
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	1
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	1
Nearside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Service brake is causing the vehicle to swerve to the nearside \|3.7.C.2\|	1
Horn not working \|1.6.2a\|	1
Nearside Front Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside Semaphore indicator arm does not extend smoothly \|1.4.C.1a\|	1
Nearside Semaphore indicator arm does not retract smoothly \|1.4.C.1a\|	1
Front Headlamp not working on dipped beam \|1.7.5a\|	1
Rear Brake pivot excessively worn and seriously weakened \|3.5.1e\|	1
Ball joint has excessive play \|2.2.B.1f\|	1
Offside Ball joint has excessive play \|2.2.B.1f\|	1
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Brake performance not tested \|3.7.A.1\|	1
Nearside Front Anti-roll bar has excessive play in a pin/bush \|2.4.G.2\|	1
Mechanical brake component has restricted free movement	1
Offside Front Brake back plate\|s\| securing device loose \|3.5.1j\|	1

MOT History from tests of petrol ROLLS ROYCE SILVERs year 1955

Find us on Facebook