| Most common failures | No# failures |
|---|
| Brakes imbalanced across an axle | 10 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 4 |
| Registration plate lamp issues | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 3 |
| Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i)) | 3 |
| Front brake application uneven | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Headlamp aim out of alignment | 2 |
| Rear brake application uneven | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Horn not working |1.6.2a| | 2 |
| Battery insecure |1.9.1| | 2 |
| Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear brake binding | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| Nearside Front wheel cylinder has restricted free movement |3.5.1k| | 2 |
| Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Registration plate issues | 1 |
| Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
| Speedometer cannot be illuminated. |6.7.3| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Nearside Rear Shock absorber has an excessively worn linkage |2.7.4| | 1 |
| Offside Rear Shock absorber has an excessively worn linkage |2.7.4| | 1 |
| Windscreen washer not working | 1 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Offside Rear Service brake grabbing severely |3.7.C.2| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Main beam `tell-tale` not working |1.7.4c| | 1 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill has hole in it |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill has hole in it |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill has hole in it |6.2.2 |d| |i|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| rear brakes release unevenly |3.7.B.4| | 1 |
| Offside Front Brake hose leaking |3.6.A.1| | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Front Upper Axle swivel joint has excessive play in a swivel pin |2.5.A.3b| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Offside Front Brake hose twisted |3.6.B.4c| | 1 |
| Offside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake pivot has restricted free movement |3.5.1k| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| front brakes release unevenly |3.7.B.4| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Track rod end loose |2.2.B.1d| | 1 |
| Nearside Front Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Front Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front Brake pipe leaking |3.6.A.1| | 1 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| An item not tested |Manual| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/jacking point holded within 30cm of nearside front seat mounting |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/jacking point holded within 30cm of offside front seat mounting |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch holded within 30cm of nearside front bump stop/ engine mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/bump stop |5.3.6 |a| |i|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Upper Suspension component pin or bush likely to become detached locking pin for castellated nut missing (5.3.4 (a) (ii)) | 1 |