| Most common failures | No# failures |
|---|
| Registration plate issues | 4 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
| Headlamp aim out of alignment | 3 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Stop lamp not working For front brake (4.3.1 (a) (ii)) | 1 |
| Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Rear Brake fluid contaminated (1.8 (a)) | 1 |
| Offside Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Shock absorber has an excessively worn bush lower bush (5.3.2 (c)) | 1 |
| Stop lamp not working Front Brake |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake operation |1.3.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake operation |1.3.1a| | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Central Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Central Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Nearside Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Exhaust is leaking and excessively noisey Excessive leak from down pipe / engine |7.1.1b| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake disc|s| securing bolt|s| missing Rear brake disc securing bolts fouling rear caliper body |3.2.A1g| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Headlamp incorrect colour |4.1.4 |a|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |