| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 35 |
| Horn not working |1.7.3a| | 16 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Steering headbearing has excessive free play |2.2.2| | 12 |
| Riders seat insecure |6.2.1a| | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Registration plate issues | 8 |
| Front wheel bearings have excessive free play |2.3.5b| | 8 |
| Front wheel bearings are excessively rough |2.3.5b| | 7 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Nearside Footrest insecure |6.2.1a| | 5 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
| Offside Front Direction indicator missing |1.5.1a| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
| Chain guard insecure |6.2.1c| | 2 |
| Rear Footrest missing (6.2.12 (a)) | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride joining link |6.2.1h| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Fairings so located that it is likely to impede the steering |2.1.2e| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Offside Front Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear Direction indicator incorrect colour |1.5.1b| | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Pillion seat insecure (6.2.6 (a) (ii)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Registration plate lamp issues | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Exhaust system insecure Exhaust manifold insecure (6.1.2 (a)) | 1 |
| Brake hose excessively damaged Front brake hose fouling frame (1.1.12 (b) (ii)) | 1 |
| Exhaust silencer insecure Exhaust fouling frame (8.1.1 (b) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak fork seal leaking (5.3.2 (b)) | 1 |
| Clutch lever bent so it cannot be readily operated Clutch lever has sharp edge (6.2.7 (b)) | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake component is fractured |3.1.5| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Road spring worn so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i)) | 1 |
| Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
| Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Upper Throttle operating incorrectly |6.2.1f| | 1 |
| Front Lower Front suspension assembly component loose lower yoke bolt seized , making fork loose |2.3.1| | 1 |
| Front Upper Footrest insecure left hand footrest loose on main bolt |6.2.1a| | 1 |
| Brake fluid contaminated (1.8 (a)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Rear Brake cylinder insecurely mounted rear brake lever and piston worn and out of adjustment |3.2.B1a| | 1 |
| Front shock absorber seal failed and leaking oil front forks |2.3.3| | 1 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls Does not work from front brake switch (4.3.2 (a) (iii)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Direction indicators not working rear indicators not working |1.5.1c| | 1 |
| Nearside Chain guard insecure |6.2.1c| | 1 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Brake disc|s| has excessive run out front disc has 30 kgf run out and effecting the suspension |3.2.A1m| | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Brake locking device insecure |3.2.A1e| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake lever has inadequate reserve travel adjustment worn/sliping |3.1.3b| | 1 |
| Front Brake hose fouling clock bracket |3.2.B3b| | 1 |
| Offside Front Front suspension assembly component missing shock absorber clamp bolt missing |2.3.1| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Offside Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls not working off rear lever (4.3.2 (a) (iii)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure fairing (6.1.1 (b) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle increases when handle bars turned to lock to lock (6.2.7 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure right hand fairing |6.1.1 |b| |i|| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Rear Brake linkage has restricted free movement in cylinder |1.1.15 |e|| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Front Brake component insecure bolt missing from handle bar clamp (1.1.21 (c)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Brake back plate|s| insecure |3.2.A1j| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Horn missing |1.7.1| | 1 |
| Centre Front Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Offside Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Brake pedal is inoperative |3.1.3c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Front Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Central Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of another lamp flicker when indicators on |1.2.2c| | 1 |
| Seat insecure passenger |6.2.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Direction indicator obviously incorrectly positioned N/S & O/S Front (4.4.3 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Steering linkage locking device missing clutch lever (2.1.3 (d)) | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Nearside Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Offside Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Rear Brake component is fractured |3.1.5| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link C clip wrongly fitted |6.2.1h| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Rear Brake fluid reservoir insecurely mounted rear brake reservoir |3.2.B1a| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Stop lamp does not illuminate immediately a brake applies Does not illuminate when rear brake applied |1.3.1a| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Handlebar restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Shock absorber has a serious fluid leak Fork seals |5.3.2 |b|| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Fuel system component insecure Tank |7.2.1b| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment rear brake lever (1.1.15 (f)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |