Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 17 |
Headlamp aim out of alignment | 12 |
Registration plate issues | 10 |
Drive chain excessively loose |6.2.1d| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not working (7.7 (a) (ii)) | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Horn not working |1.7.3a| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Exhaust mounting does not fully support the exhaust system front mount nut missing |7.1.1.c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Rear Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Front Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Direction indicators not working all indicaters not fitted |1.5.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front Handlebar deformed handlebars are bent on right hand side |2.1.1b| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
All direction indicators not working x4 (4.4.1 (a) (ii)) | 1 |
Rear Brake cylinder leaking and braking performance affected master (1.1.16 (b) (ii)) | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Braking system does not have an approriate system/s fitted according to its age no rear disc or pads etc |3.1.1| | 1 |
Brake locking device missing rear brake lever |3.2.A1e| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid cap not fitted correctly |3.2.B1e| | 1 |
Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Direction indicator not working left indicators don`t flash.
right indicators don`t work |1.5.1c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected revs rise on right hand lock |6.2.7 |a| |ii|| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators not working missing |1.5.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Stop lamp affected by the operation of another lamp stop lamp not working when lights on |1.3.2| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Nearside Front Direction indicator not working Not flashing |1.5.1c| | 1 |
Nearside Rear Direction indicator not working Not working |1.5.1c| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Registration plate lamp issues | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake cylinder damaged (1.1.16 (a) (i)) | 1 |
Clutch lever positioned so it cannot be readily operated clutch cable not secure nut not secure (6.2.7 (b)) | 1 |
Nearside Rear Suspension arm attachment bracket/mounting insecure rear wheel tension nut insecure (5.3.3 (a) (i)) | 1 |
Offside Rear Suspension arm mounting has an unsafe modification rear wheel tension nut missing (5.3.3 (c) (i)) | 1 |
Rear Brake pedal so insecure that the brake cannot be readily applied foot brake spring not working (1.1.2 (e) (ii)) | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Stop lamp likely to become detached |4.3.1 |c| |ii|| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Horn missing |1.7.1| | 1 |
Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Direction indicators not working All |1.5.1c| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Direction indicator obscured |1.5.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Centre Rear Stop lamp insecure |1.3.3b| | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |