Most common failures | No# failures |
---|
Parking brake lever has no reserve travel |3.1.6b| | 6 |
Registration plate lamp issues | 5 |
Offside Headlamp not working on dipped beam |1.7.5a| | 5 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Brake pipe excessively corroded | 4 |
Rear fog lamp not working |1.3.2b| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Headlamp aim out of alignment | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake application uneven | 2 |
Brakes imbalanced across an axle | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Battery insecure |1.9.1| | 1 |
Electrical wiring insecure |1.9.2a| | 1 |
Nearside Rear Electrical wiring insecure |1.9.2a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Power steering malfunctioning |2.3.3a| | 1 |
Rear brake binding | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Front Electrical wiring insecure lower column wires |1.9.2a| | 1 |
Offside Rear Electrical wiring insecure wires on chassis not secure |1.9.2a| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded door step on underside |5.2.6| | 1 |
Nearside Battery insecure |1.9.1| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger |2.4.A.3| | 1 |
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Rear fog lamp switch faulty |1.3.1a| | 1 |
Offside Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Windscreen washer not working | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Nearside Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Upper Shock absorber insecure |2.7.2b| | 1 |
Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Power steering component|s| leaking |2.3.3b| | 1 |