| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 50 |
| Registration plate lamp issues | 32 |
| Brakes imbalanced across an axle | 28 |
| Headlamp aim out of alignment | 23 |
| Offside Steering rack gaiter split |2.2.D.2d| | 17 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 14 |
| Brake hose excessively deteriorated | 13 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 13 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 11 |
| Service brake: efficiency below requirements |3.7.B.7| | 9 |
| Offside Rear fog lamp not working |1.3.2b| | 9 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 9 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 8 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 8 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 8 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 8 |
| Brake pipe excessively corroded | 8 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 8 |
| Parking brake: efficiency below requirements |3.7.B.7| | 7 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 7 |
| Rear brake application uneven | 7 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 7 |
| Nearside Stop lamp not working |1.2.1b| | 6 |
| Rear fog lamp not working |1.3.2b| | 6 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 6 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 6 |
| Nearside Rear Stop lamp not working |1.2.1b| | 6 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Battery insecure |1.9.1| | 6 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 5 |
| Rear parking brake recording little or no effort | 5 |
| Rear Exhaust system not adequately supported |7.1.1| | 5 |
| Rear brake binding | 5 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 5 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 5 |
| Offside Front Direction indicator not working |1.4.A.2c| | 5 |
| Emissions not tested |7.0| | 4 |
| Offside Stop lamp not working |1.2.1b| | 4 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 4 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 4 |
| Rear Rear fog lamp not working |1.3.2b| | 4 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 4 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 4 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 4 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Nearside front brake binding |3.7.B.1| | 3 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 3 |
| Registration plate issues | 3 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 3 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Rear Stop lamp not working |1.2.1b| | 3 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 3 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 3 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
| Offside Rear Stop lamp not working |1.2.1b| | 3 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 3 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 3 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
| Nearside Side repeater not working |1.4.A.2c| | 3 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
| Exhaust system not adequately supported |7.1.1| | 3 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Rear Exhaust mounting missing |7.1.1b| | 2 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
| Offside Front brake disc excessively pitted |3.5.1h| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Windscreen washer not working | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Fuel cap/sealing device sealing washer torn |7.2.4c| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Emissions unable to be completed (8.2.1.2 (d)) | 2 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 2 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Exhaust system insecure (6.1.2 (a)) | 2 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside front brake binding |3.7.B.1| | 2 |
| Mechanical brake component has restricted free movement | 2 |
| Nearside Front front brake binding |3.7.B.1| | 2 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 2 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Front brake excessively fluctuating | 2 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Side repeater not working |1.4.A.2c| | 2 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
| Brake hose damaged | 2 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 2 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 2 |
| Brake hose has insufficient room to move | 2 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Offside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Brake cable has restricted free movement |3.5.1k| | 1 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Front Exhaust mounting missing |7.1.1b| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Speedometer clearly inoperative |7.8 |b| |ii|| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| front brake binding |3.7.B.1| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Steering wheel in a condition that hampers proper control |2.1.1| | 1 |
| Exhaust has a major leak of exhaust gases rear box |7.1.2| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Hazard warning lamps inoperative only work on o/s (4.4.1 (e)) | 1 |
| Offside Rear Stop lamp(s) adversely affected by the operation of another lamp with side lights on (4.3.3 (b)) | 1 |
| Offside Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp bad earth rear lights |1.1.A.3f| | 1 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
| Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g)) | 1 |
| Emissions unable to be completed excess smoke (8.2.1.2 (d)) | 1 |
| Rear All position lamps adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger near rear spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Track rod end ball joint has excessive play Inner joint (2.1.3 (b) (i)) | 1 |
| Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Direction indicator not working intermittent (4.4.1 (a) (ii)) | 1 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 1 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Power steering inoperative (2.1.5 (c) (i)) | 1 |
| Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Offside Headlamp reflector seriously defective |4.1.1 |b| |ii|| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at leaf spring rear hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at leaf spring rear hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill and inner sill (6.1.1 (c) (i)) | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch at strut top mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet under battery to front panel (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front cross member at offside and nearside mountings (5.3.6 (a) (i)) | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at front jacking point and floor pan (6.2.2 (d) (i)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect KICK UP WRONG SIDE( LEFT HAND DRIVE FITTED) (4.1.2 (c)) | 1 |
| Nearside Brake prescribed area is excessively corroded LAOD SENSING MOUNTING (1.1.21 (e) (i)) | 1 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect kick up wrong direction (4.1.2 (c)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Rear Service brake imbalanced across an axle (1.2.1 (b) (i)) | 1 |
| Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
| Nearside Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 1 |
| Nearside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Side repeater excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Central Fuel system component leaking above rear of sub frame, pump (6.1.3 (b) (i)) | 1 |
| Offside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Fuel hose leaking Filter area,above crossmember at rear of gearbox (6.1.3 (b) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting flitch (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill and outrigger (6.2.2 (d) (i)) | 1 |
| Emissions not tested (8.2.1.2 (d)) | 1 |
| Steering rack gaiter split both. |2.2.D.2d| | 1 |
| Exhaust has a major leak of exhaust gases centre. |7.1.2| | 1 |
| Exhaust engine idle speed too high |7.3.D.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength swinging shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength swinging shackle (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to excessive leak on exhaust (8.2.1.2 (d)) | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Front brake application uneven | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front to rear and front inner arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and inner arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Centre Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Windscreen has damage | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Front Brake hose leaking |3.6.A.1| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced undersill |7.1.1 |a| |i|| | 1 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Nearside Direction indicator not working front and rear (4.4.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced JACKING POINT (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced JACKING POINT (7.1.1 (a) (i)) | 1 |
| Emissions not tested OVERHEATED (8.2.1.2 (d)) | 1 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/jacking point |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Side repeater not working |1.4.A.2c| | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Rear fog lamp switch faulty |1.3.1a| | 1 |
| Nearside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
| Nearside Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Steering system excessively tight |2.2.D.1| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 1 |
| Rear Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Rear Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front Macpherson strut upper support bearing is stiff in operation |2.5.B.1b| | 1 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength Inner wing |5.3.6 |a| |i|| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Front Bonnet primary retaining device ineffective safety catch inoperative (3.1 (c)) | 1 |
| Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction wipers (3.1 (a) (ii)) | 1 |
| Offside Rear Position lamp not working side light (4.2.1 (a) (ii)) | 1 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Exhaust fumes entering cabin tail pipe missing (6.1.2 (b) (i)) | 1 |
| Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Emissions not tested during test was failing on c.o and lambda but vehicle over heated in middle of the exhaust emissions and was last check to Finnish off m.o.t (8.2.1.2 (d)) | 1 |
| Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Braking system leaking front to rear brake pipe |3.6.A.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Track rod end ball pin shank loose |2.2.B.1c| | 1 |
| Power steering component|s| leaking |2.3.3b| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount |2.4.A.3| | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step inner and outer (6.2.2 (d) (i)) | 1 |
| Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both spring hangers (5.3.6 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill /step (7.1.1 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger |6.2.2 |d| |i|| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Steering system excessively rough |2.2.D.1| | 1 |
| Nearside Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Offside Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Nearside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Front Battery insecure |1.9.1| | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Front Bonnet retaining device ineffective |8.4.2| | 1 |
| Nearside Front Steering rack insecure |2.2.B.1a| | 1 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Rear passenger door hinge insecure |6.2.B.2| | 1 |
| Steering rack insecure |2.2.B.1a| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Rear fog lamp missing |1.3.2a| | 1 |
| Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect Bulb had fell out |4.1.2 |c|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Offside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Nearside Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
| Offside Front Headlamp insecure |1.7.3| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Front Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
| Offside Steering rack insecure |2.2.B.1a| | 1 |
| Exhaust has a major leak of exhaust gases middle pipe |7.1.2| | 1 |
| Nearside Battery insecure |1.9.1| | 1 |
| Offside Front Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insicure |6.1.7 |g| |ii|| | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Lower body / sill corroded at front & rear arch area |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Lower body / sill corroded at front & rear arch area |6.1.B.2| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect Headlamp has no beam image |1.8.A.1b| | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member at jacking point (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch holed (5.3.6 (a) (i)) | 1 |
| Power steering component leaking (2.1.5 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill/quarter |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill/ outrigger |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill/ outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mount |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch |5.3.6 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |