Most common failures | No# failures |
---|
Brake hose excessively deteriorated | 5 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
Headlamp aim out of alignment | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Registration plate lamp issues | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Rear parking brake recording little or no effort | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Brake pipe excessively corroded | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Registration plate issues | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Rear brake disc in such a condition that it is seriously weakened | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Mechanical brake component has restricted free movement | 1 |
Offside Front An item not tested |Manual| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Coil spring not correctly located |2.4.C.2| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Parking brake lever has no reserve travel |3.1.6b| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Rear brake binding | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Battery insecure |1.9.1| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Front Steering rack gaiter missing or no longer prevents the ingress of dirt both |2.1.3 |g| |ii|| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Rear Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |