>

MOT History from tests of petrol QINGQI QM125GY-2Bs year 2010

Review the list of common QINGQI QM125GY-2B failures below or to perform a specific mot history check on your QINGQI then use our popular KnowYourCar service

mot history
Pass percent:43.66%
(The average a petrol QINGQI QM125GY-2B year 2010 passes without issue)
Based on:71 MOT Tests
Most common failuresNo# failures
Rear reflector on motorcycle missing |1.4.1|8
Rear Rear wheel bearings have excessive free play |2.4.A.2c|4
Headlamp aim out of alignment4
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Front wheel bearings have excessive free play |2.3.5b|3
Rear reflector missing |4.8.2 |a| |ii||3
Offside Rear Footrest missing |6.2.1a|2
Registration plate issues2
Rear Wheel bearing has excessive play |5.1.3 |a| |i||2
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|2
Drive chain worn to excess |6.2.1e|2
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||2
Offside Rear Direction indicator not working |4.4.1 |a| |ii||2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Nearside Rear Footrest missing |6.2.1a|2
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|2
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|2
Handlebar deformed bent N/S |2.1.1b|1
Rear suspension bush has excessive free play lower swingarm linkage |2.4.A2a|i||1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front suspension assembly component excessively misaligned |2.3.1|1
Offside Rear Direction indicator insecure |1.5.3b|1
Offside Front Direction indicator insecure |1.5.3b|1
Throttle operating incorrectly sticking |6.2.1f|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Throttle operating incorrectly insecure |6.2.1f|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Offside Front Direction indicator damaged and function impaired lens missing |1.5.3a|1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Offside Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d||1
Front Brake cylinder excessively weakened by corrosion |1.1.16 |d| |i||1
Front Stop lamp not working |4.3.1 |a| |ii||1
Offside Footrest insecure |6.2.1a|1
Position lamp switch insecure |1.1.4b|1
Handlebar deformed |2.1.1b|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Brake pedal cannot be applied smoothly |3.1.3d|1
Brake pedal cannot be released smoothly |3.1.3d|1
Rear Brake locking device insecure |3.2.A1e|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front wheel spindle loose |2.3.5a|1
Front Wheel spoke excessively loose |4.2.1b|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Wheel spoke excessively loose |4.2.1b|1
Offside Rear Footrest insecure |6.2.1a|1
Chain guard insecure |6.2.1c|1
Front suspension has inadequate damping effect. |2.3.6c|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Rear Direction indicator missing |1.5.1a|1
Rear Brake caliper|s| insecure |3.2.A1j|1
Drive chain excessively tight |6.2.1d|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Front Front shock absorber seal failed and leaking oil x2 |2.3.3|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Brake performance not tested |3.3|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Headlamp deteriorated and function impaired melted plastic lense |1.2.3a|1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition no baffle |7.1.2|1
Front wheel bearings are excessively rough |2.3.5b|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively stiff with the wheel raised |2.2.1b|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Indicator switch insecure ROTATING ON BARS |1.5.4|1
Throttle operating incorrectly EXCESSIVELY STIFF AND STICKING |6.2.1f|1
Rear Lower Footrest missing BOTH MISSING |6.2.1a|1
Rear Rear mono-shock pivot excessively worn |2.4.B.4|1
Rear Drive chain excessively loose |6.2.1d|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Front Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear Brake disc|s| excessively worn NEEDS REPLACING |3.2.A1l|1
Rear suspension bush has excessive free play BOTTOM MONOSHOCK BUSH AND LINKAGE BUSH IN THE MIDDLE OF THE SWINGARM NEED REPLACING |2.4.A2a|i||1
Offside Fork yoke insecure Clamp loose |2.2.2 |d| |i||1
Steering linkage locking device missing Lock stop |2.1.3 |d||1
Rear brake disc in such a condition that it is seriously weakened1
Brake has no recorded effort at a wheel |1.2.1 |a| |ii||1
Nearside Shock absorber has a serious fluid leak |5.3.2 |b||1
Drive chain excessively loose |6.1.7 |c| |i||1
Drive chain so worn it is likely to fail |6.1.7 |c| |ii||1
Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i||1
Stop lamp not working |4.3.1 |a| |ii||1
Rear Brake performance not tested rear brake master cylinder seized no brake effort recorded |3.3|1
Drive chain excessively loose |6.2.1d|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy