| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 28 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Drive chain excessively loose |6.2.1d| | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Horn not working |1.7.3a| | 9 |
| Steering headbearing has excessive free play |2.2.2| | 7 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
| Registration plate issues | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Handlebar mounting clamp loose |2.1.1a| | 3 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
| Offside Footrest insecure |6.2.1a| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Exhaust has part of the system missing Down pipe gasket blown out and leaking |7.1.1a| | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
| Offside Rear Footrest missing (6.2.12 (a)) | 2 |
| Indicator switch defective |1.5.4| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Upper Handlebar mounting clamp loose |2.1.1a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Offside Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Nearside Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Rear Lower Suspension component corroded and seriously weakened Swing arm is corroded to excess. |5.3.3 |b| |i|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Direction indicators affected by the operation of another lamp indicators fail when position lamps on |1.5.1c| | 1 |
| Front suspension fouling which affects the movement of the front suspension. `l` plate fouls front suspension. |2.3.6a| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Fuel system component insecure Tank |7.2.1b| | 1 |
| Stop lamp does not illuminate immediately a brake applies Rear brake |1.3.1a| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Centre Rear Wheel alignment incorrect which adversely affects the handling rear wheel adjustment was incorrect |2.5.1| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted wrong direction |6.1.7 |j| |i|| | 1 |
| Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear suspension bearing has excessive free play swing arm |2.4.A2a|i|| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Offside Direction indicators not working Right Hand indicators work periodicaly |1.5.1c| | 1 |
| Indicator tell tale not functioning Tell tail indicator lamps missing |1.5.2| | 1 |
| Front position lamp missing Front position lamp missing |1.1.1a| | 1 |
| Rear Rear reflector on motorcycle missing Rear reflector missing |1.4.1| | 1 |
| Nearside Front Lower Front suspension assembly component excessively misaligned Left hand fork bottom miss fitted |2.3.1| | 1 |
| Nearside Front suspension has severe distortion of a load bearing member or its supporting structure. Left hand fork stancian has several dents in the working area |2.3.8| | 1 |
| Drive chain worn to excess Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess Rear sprocket worn to excess |6.2.1e| | 1 |
| Rear wheel bearings have excessive free play Excessive play in rear wheel bearing |2.4.A.2c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen Headlamp beam pattern not visable |1.6.B.1| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake switch |1.3.1a| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component headstock bearings |2.3.4| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride brake steady arm |6.2.1h| | 1 |
| Rear Upper Locking devices not correctly fitted which may make the motor bicycle dangerous to ride steady arm |6.2.1h| | 1 |
| Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Footrest insecure |6.2.12 |a|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Nearside Front Steering lock stop missing |2.1.3| | 1 |
| Offside Front Steering lock stop missing |2.1.3| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Chain guard insecure |6.2.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Horn missing |1.7.1| | 1 |
| Brake lever mounting insecure control one~|end cap| |3.1.2a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies control 2 |1.3.1a| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear suspension bush has excessive free play rear swing arm |2.4.A2a|i|| | 1 |
| Wheel alignment incorrect which adversely affects the steering front steering out of alignment with wheel |2.5.1| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear suspension bush has excessive free play rear shock absorber top bush |2.4.A2a|i|| | 1 |
| Nearside Front Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride brake hose protection plate insecure |6.2.1h| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Handlebar mounting clamp loose movement on handle bars |2.1.1a| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Front position lamp does not illuminate immediately when switched on front side light |1.1.3a| | 1 |
| Direction indicators not working all not working |1.5.1c| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Stop lamp not working Wires were disconnected (4.3.1 (a) (ii)) | 1 |
| Exhaust is leaking and excessively noisey Head to downpipe. |7.1.1b| | 1 |
| Direction indicator not working All indicators |1.5.1c| | 1 |
| Steering operation restricted in free movement from lock to lock wiring (2.1.4 (c)) | 1 |
| Rear Brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Front Suspension attachment bracket/mounting insecure brake hose bracket (5.3.3 (a) (i)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
| Centre Rear Lower Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Rear Lower Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Centre Rear Lower Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front Upper Direction indicators not working |1.5.1c| | 1 |
| Centre Rear Upper Direction indicators not working |1.5.1c| | 1 |
| Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Centre Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Centre Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |