Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 11 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
Headlamp aim out of alignment | 4 |
Offside Stop lamp not working |1.2.1b| | 4 |
Parking brake lever has no reserve travel |3.1.6b| | 4 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Registration plate lamp issues | 3 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Rear parking brake recording little or no effort | 3 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 3 |
Brakes imbalanced across an axle | 3 |
Horn not working |1.6.2a| | 3 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Rear brake application uneven | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Mechanical brake component has restricted free movement | 1 |
Windscreen wiper blade insecure | 1 |
Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Nearside Front Track rod end ball pin shank loose |2.2.B.1c| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake pipe excessively corroded | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Bonnet cannot be secured in the closed position |8.4.1| | 1 |
Offside Rear fog lamp insecure |1.3.2a| | 1 |
front brake binding |3.7.B.1| | 1 |
Nearside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Nearside Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Centre Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear fog lamp switch faulty |1.3.1a| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Windscreen has damage | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Front brake application uneven | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Front Suspension arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Rear Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Emissions not tested |7.0| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front coil spring fractured |2.4.C.1a| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |