Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Offside Steering lock stop missing |2.1.3| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies stop switch |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Offside Position lamp switch insecure |1.1.4b| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Brake caliper insecure |1.1.16 |c| |i|| | 1 |
Nearside Rear position lamp incorrect colour |1.1.2b| | 1 |
Offside Rear position lamp incorrect colour |1.1.2b| | 1 |
Offside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Lower Suspension attachment bracket/mounting insecure Yoke |5.3.3 |a| |i|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Rear Brake back plate insecure |1.1.14 |d|| | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure Mudguard |6.1.1 |b| |i|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Engine mounting/bracket excessively loose all (6.1.8 (a) (ii)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies on rear brake pedal |1.3.1a| | 1 |
Registration plate lamp issues | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working Front control (4.3.1 (a) (ii)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Rear Upper Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition baffles missing (8.1.1 (a)) | 1 |
Throttle operating incorrectly sticking (6.2.7 (a) (i)) | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Rear Upper Rear shock absorber insecurely mounted not enough thread showing to aloud for locking nut |2.4.A.3b| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock nearside lock stop missing (2.1.4 (b)) | 1 |
Registration plate issues | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Suspension component pin or bush excessively worn rear suspension linkage bearings (5.3.4 (a) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain link clip. |6.2.1h| | 1 |
Central Front Inner Position lamp not working side light bulb inoperable (4.2.1 (a)) | 1 |
Nearside Rear Lower Drive chain so loose it is likely to fail drive chain excessively loose and on maximum tension (6.1.7 (c) (ii)) | 1 |
Offside Rear Lower Wheel fixing missing (single fixing) rear drum torque bar securing bolt missing split pin (5.2.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |