Most common failures | No# failures |
---|
Headlamp aim out of alignment | 271 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 212 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 115 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 98 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 91 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 88 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 74 |
Horn not working |1.7.3a| | 66 |
Steering headbearing has excessive free play |2.2.2| | 65 |
Registration plate issues | 64 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 56 |
Rear reflector on motorcycle missing |1.4.1| | 55 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 47 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 45 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 41 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 34 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 32 |
Riders seat insecure |6.2.1a| | 32 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 29 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 29 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 28 |
Offside Steering lock stop ineffective |2.1.3| | 27 |
Exhaust is leaking and excessively noisey |7.1.1b| | 24 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 23 |
Headlamp aim not tested |1.6| | 23 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 22 |
Throttle operating incorrectly |6.2.1f| | 22 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 22 |
Stop lamp remains on when the brake is released |1.3.1e| | 22 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 22 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 21 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 20 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 20 |
Nearside Front Direction indicator not working |1.5.1c| | 19 |
Rear reflector missing (4.8.2 (a) (ii)) | 19 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 18 |
Indicator switch defective |1.5.4| | 16 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 16 |
Direction indicators not working |1.5.1c| | 16 |
Registration plate lamp issues | 14 |
Nearside Front Direction indicators not working |1.5.1c| | 14 |
Front Brake excessively binding (1.2.1 (f)) | 13 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 13 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 12 |
Offside Front Direction indicator not working |1.5.1c| | 11 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 11 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 10 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 10 |
Exhaust excessively deteriorated |7.1.1a| | 10 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 10 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 10 |
Nearside Steering lock stop ineffective |2.1.3| | 10 |
Horn not loud enough to be heard by another road user |1.7.3a| | 9 |
Brake lever has inadequate reserve travel |3.1.3b| | 9 |
Stop lamp remains on when the brakes are released | 9 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 9 |
Rear Brake lever insecure |3.1.2a| | 9 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 8 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 8 |
Rear Position lamp not working (4.2.1 (a)) | 8 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 8 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 8 |
Rear Direction indicator incorrect colour |1.5.1b| | 8 |
Horn not working (7.7 (a) (ii)) | 8 |
Horn not working |7.7 |a| |ii|| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 8 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 8 |
Front Brake excessively binding |1.2.1 |f|| | 8 |
Fuel cap sealing washer missing |7.2.2c| | 7 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 7 |
Front Horn not working |1.7.3a| | 7 |
Stop lamp not working (4.3.1 (a) (ii)) | 7 |
Indicator tell tale not functioning |1.5.2| | 7 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 7 |
Horn not working (7.7 (a)) | 7 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Front Steering headbearing has excessive free play |2.2.2| | 7 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 7 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 7 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 6 |
Nearside Direction indicators not working |1.5.1c| | 6 |
Nearside Rear Direction indicator not working |1.5.1c| | 6 |
Headlamp aim not tested (4.1.2 (b)) | 6 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 6 |
Headlamp switch faulty |1.2.4| | 6 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 6 |
Offside Steering lock stop missing |2.1.3| | 6 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 6 |
Horn control defective |1.7.2a| | 6 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 5 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
Direction indicator not working |1.5.1c| | 5 |
Offside Direction indicator not working |1.5.1c| | 5 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 5 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 5 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 5 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 5 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 5 |
Exhaust mounting missing |7.1.1c| | 5 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 5 |
Stop lamp not working |4.3.1 |a| |ii|| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Rear position lamp incorrect colour |1.1.2b| | 5 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 5 |
Rear Position lamp not working |4.2.1 |a|| | 5 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 5 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |