Most common failures | No# failures |
---|
Headlamp aim out of alignment | 81 |
Exhaust is leaking and excessively noisey |7.1.1b| | 43 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 38 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 34 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 29 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 26 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 22 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 22 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 22 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 20 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Steering headbearing has excessive free play |2.2.2| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 13 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Offside Rear Direction indicator not working |1.5.1c| | 11 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Exhaust excessively deteriorated |7.1.1a| | 10 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 8 |
Riders seat insecure |6.2.1a| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Horn not working |1.7.3a| | 7 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
Nearside Rear Direction indicator not working |1.5.1c| | 6 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 6 |
Indicator switch defective |1.5.4| | 6 |
Registration plate lamp issues | 6 |
Front Steering headbearing has excessive free play |2.2.2| | 6 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Registration plate issues | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Headlamp switch faulty |1.2.4| | 5 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Headlamp aim not tested |1.6| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear wheel insecure |4.2.3b| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Riders seat insecure (6.2.5 (a) (ii)) | 3 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
An item not tested |Manual| | 2 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 2 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Nearside Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Seat insecure |6.2.1a| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Offside Rear suspension component cracked |2.4.A.1a| | 2 |
Horn control defective |1.7.2a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 2 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Exhaust is leaking and excessively noisey (7.1.1b) | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Headlamp switch faulty |1.2.4| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 2 |
Indicator tell tale not operating correctly |1.5.2| | 2 |