Most common failures | No# failures |
---|
Headlamp aim out of alignment | 90 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 30 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 24 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 21 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 18 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 16 |
Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Registration plate lamp issues | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
Nearside Steering lock stop ineffective |2.1.3| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Registration plate issues | 4 |
Nearside Steering lock stop missing |2.1.3| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear suspension bearing has excessive free play engine mounts |2.4.A2a|i|| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Headlamp aim not tested |4.1.2 |b|| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear suspension bush has excessive free play engine mounts |2.4.A2a|i|| | 2 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake caliper leaking |1.1.16 |b| |i|| | 2 |
Front Lower Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Nearside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front shock absorber seal failed and leaking oil Both sides |2.3.3| | 1 |
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake disc contaminated Shock absorber leaking (1.1.14 (b)) | 1 |
Brake performance not tested Due to contamination of front brake (1.2.1 (g)) | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear suspension bush has excessive free play swing arm/engine mounting |2.4.A2a|i|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear suspension bush has excessive free play engine mounts cush etc |2.4.A2a|i|| | 1 |
Offside Rear Rear suspension component loose |2.4.A.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts insecure |3.2.B2c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Wheel alignment incorrect which adversely affects the handling engine mounts badly worn |2.5.1| | 1 |
Offside Front Headlamp insecure |1.2.3b| | 1 |
Front Upper Motorcycle structure excessively damaged |6.1.1a| | 1 |
Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Rear suspension bearing excessively deteriorated Linkage. |2.4A.2a|i|| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen on mainbeam |4.1.2 |a|| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Valve stem seriously misaligned front volve (5.2.3 (j)) | 1 |
Nearside Front Lower Position lamp not working (4.2.1 (a)) | 1 |
Front Upper Position lamp not working (4.2.1 (a)) | 1 |
Front Lower Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front wheel spindle securing nut locking device insecure CRACKED |2.3.3a| | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal leaking (5.3.2 (b)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Exhaust has part of the system missing |7.1.1a| | 1 |
Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Rear Suspension arm pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Lower Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Exhaust is leaking and excessively noisey downpipe not secure |7.1.1b| | 1 |
Rear suspension bush has excessive free play Engine mountings |2.4.A2a|i|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear suspension bush has excessive free play engine bushes |2.4.A2a|i|| | 1 |
Engine mounting/bracket bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Rear Rear shock absorber has inadequate damping effect. both |2.4.A.3b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Suspension component pin or bush excessively worn excessive play in rear suspension/engine bush |5.3.4 |a| |i|| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock left stop lock not effective |2.1.4 |a|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear suspension bush has excessive free play engine mounting |2.4.A2a|i|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Suspension component pin or bush excessively worn Engine mounting |5.3.4 |a| |i|| | 1 |
Offside Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Offside Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear suspension bush has excessive free play suspension bushes/engine mountings have excess wear and movement |2.4.A2a|i|| | 1 |
Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear Brake lever insecure |1.1.2 |e| |i|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Exhaust has a major leak of exhaust gases emission pipe (6.1.2 (a)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Front Steering operation fouling on the fuel tank or bodywork on full lock Steering stop deformed, n/s (2.1.4 (b)) | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |