| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 417 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 319 |
| Registration plate issues | 207 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 146 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 132 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 100 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 100 |
| Fuel cap sealing washer missing |7.2.2c| | 95 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 83 |
| Riders seat insecure |6.2.1a| | 78 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 76 |
| Registration plate lamp issues | 73 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 64 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 58 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 55 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 49 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 45 |
| Front Brake excessively binding (1.2.1 (f)) | 45 |
| Steering headbearing has excessive free play |2.2.2| | 43 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 39 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 38 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 38 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 37 |
| Exhaust excessively deteriorated |7.1.1a| | 36 |
| Stop lamp remains on when the brakes are released | 35 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 30 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 29 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 29 |
| Horn not working |1.7.3a| | 28 |
| Rear reflector on motorcycle missing |1.4.1| | 28 |
| Rear Position lamp not working (4.2.1 (a)) | 28 |
| Headlamp aim not tested |1.6| | 27 |
| Stop lamp not working (4.3.1 (a) (ii)) | 27 |
| Front suspension has inadequate damping effect. |2.3.6c| | 26 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 25 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 25 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 22 |
| Headlamp aim not tested (4.1.2 (b)) | 21 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 20 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 20 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 19 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 19 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 19 |
| Front Brake excessively binding |1.2.1 |f|| | 17 |
| Brake lever has inadequate reserve travel |3.1.3b| | 17 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 17 |
| Direction indicators not working |1.5.1c| | 16 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 16 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 16 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 16 |
| Front Position lamp not working (4.2.1 (a)) | 16 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 15 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 14 |
| Stop lamp remains on when the brake is released |1.3.1e| | 14 |
| Headlamp aim not tested |4.1.2 |b|| | 14 |
| All direction indicators not working (4.4.1 (a) (ii)) | 14 |
| Rear reflector missing (4.8.2 (a) (ii)) | 14 |
| Rear Position lamp not working |4.2.1 |a|| | 13 |
| Riders seat insecure (6.2.5 (a) (ii)) | 13 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 13 |
| Throttle operating incorrectly |6.2.1f| | 12 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 12 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 12 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 12 |
| Horn control defective |1.7.2a| | 11 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 11 |
| Headlamp aim beam image kick up to the offside |1.6| | 11 |
| Stop lamp not working |4.3.1 |a| |ii|| | 11 |
| Rear reflector missing |4.8.2 |a| |ii|| | 11 |
| Front Steering headbearing has excessive free play |2.2.2| | 11 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 11 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 11 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 11 |
| Horn not working (7.7 (a)) | 11 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 10 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 10 |
| Front wheel bearings have excessive free play |2.3.5b| | 10 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 10 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 10 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 10 |
| Headlamp insecure |1.2.3b| | 9 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 9 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 9 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 9 |
| Rear Brake excessively binding (1.2.1 (f)) | 9 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 9 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 9 |