| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 671 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 526 |
| Registration plate issues | 327 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 281 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 258 |
| Riders seat insecure |6.2.1a| | 215 |
| Fuel cap sealing washer missing |7.2.2c| | 160 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 154 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 133 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 128 |
| Steering headbearing has excessive free play |2.2.2| | 123 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 78 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 77 |
| Exhaust excessively deteriorated |7.1.1a| | 77 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 77 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 73 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 64 |
| Horn not working |1.7.3a| | 62 |
| Registration plate lamp issues | 60 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 57 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 57 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 56 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 55 |
| Front suspension has inadequate damping effect. |2.3.6c| | 55 |
| Rear reflector on motorcycle missing |1.4.1| | 51 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 46 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 42 |
| Headlamp aim not tested |1.6| | 38 |
| Direction indicators not working |1.5.1c| | 37 |
| Rear Brake lever mounting insecure |3.1.2a| | 37 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 34 |
| Offside Rear Direction indicator not working |1.5.1c| | 34 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 34 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 34 |
| Brake lever has inadequate reserve travel |3.1.3b| | 33 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 32 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 32 |
| Offside Rear Direction indicators not working |1.5.1c| | 31 |
| Nearside Rear Direction indicator not working |1.5.1c| | 31 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 29 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 29 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 29 |
| Stop lamp remains on when the brakes are released | 27 |
| Front wheel bearings have excessive free play |2.3.5b| | 27 |
| Stop lamp remains on when the brake is released |1.3.1e| | 27 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 27 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 26 |
| Nearside Rear Direction indicators not working |1.5.1c| | 25 |
| Throttle operating incorrectly |6.2.1f| | 23 |
| Indicator switch defective |1.5.4| | 23 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 23 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 22 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 22 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 21 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 21 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 20 |
| Front Brake excessively binding (1.2.1 (f)) | 20 |
| Headlamp aim beam image kick up to the offside |1.6| | 19 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 19 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 18 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 18 |
| Nearside Steering lock stop ineffective |2.1.3| | 18 |
| Rear Brake lever insecure |3.1.2a| | 17 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 17 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 17 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 16 |
| Offside Steering lock stop ineffective |2.1.3| | 16 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 16 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 16 |
| Stop lamp not working (4.3.1 (a) (ii)) | 16 |
| Direction indicator not working |1.5.1c| | 15 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 15 |
| Offside Indicator tell tale not functioning |1.5.2| | 15 |
| Rear Position lamp not working (4.2.1 (a)) | 15 |
| Headlamp aim not tested (4.1.2 (b)) | 15 |
| Riders seat insecure (6.2.5 (a) (ii)) | 15 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 14 |
| Rear position lamp damaged and function impaired |1.1.1b| | 14 |
| Front mudguard insecure |2.3.7| | 14 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 14 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 14 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 14 |