Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Registration plate issues | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Front Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Riders seat insecure |6.2.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Centre Upper Riders seat insecure |6.2.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
An item not tested |Manual| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Horn not working |1.7.3a| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Lower Direction indicators not working |1.5.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Centre Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Fuel tank leaking |7.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Offside Front Front suspension assembly component loose |2.3.1| | 1 |
Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Steering linkage has excessive free play |2.2.2| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Horn emits 2 or more alternating tones |1.7.3b| | 1 |
Exhaust mounting missing main fixing bolt |7.1.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Rear suspension component cracked Damper spring lower support damaged |2.4.A.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen MASKED/TAPED DURING TEST TO REMOVE EUROPEAN KICKUP (4.1.2 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp flashing with indicators (4.2.3 (b)) | 1 |
Central Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Brake cable damaged cable has snapped (1.1.15 (a)) | 1 |
Front Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (c) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |