| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Registration plate issues | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Offside Rear Direction indicators not working |1.5.1c| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Horn not working |1.7.3a| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Built up wheel has a bolt/s missing |4.2.1c| | 2 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Brake cable badly frayed |3.2.A1b| | 1 |
| Rear Brake drum|s| insecure |3.2.A1g| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Offside Front All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Central Rear Position lamp not working |4.2.1 |a|| | 1 |
| Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Centre Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Centre Rear Direction indicator not working |1.5.1c| | 1 |
| Centre Front Lower Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| An item not tested |Manual| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
| Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
| Offside Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Indicator tell tale not functioning |1.5.2| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Centre Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Stop lamp does not illuminate immediately a brake applies with side lights on |1.3.1a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Plate brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.B1c| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Direction indicator obscured |1.5.1a| | 1 |
| Front wheel spindle securing nut|s| loose thread damaged |2.3.3a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling wheel fitted wrong |2.5.1| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Front Brake drum insecure |1.1.14 |a| |ii|| | 1 |
| Rear Brake drum insecure |1.1.14 |a| |ii|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Steering headbearing has excessive free play (2.2.2) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Front Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b) | 1 |
| Rear Brake pedal cannot be released smoothly (3.1.3d) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.5.1) | 1 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
| Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
| Headlamp not working on main beam Also switch wrong way round (4.1.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| All direction indicators not working All Indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear All position lamps not working (4.2.1 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Brake has no recorded effort at a wheel front brake does not lock in roller (1.2.1 (a) (ii)) | 1 |
| Central Front Upper Handlebar mounting insecure HANDLE BARS LOOSE (2.2.1 (a) (i)) | 1 |
| Central Front Upper Steering headbearing in such a condition that steering control is adversely affected steering control adversely affected, dangerous (2.2.2 (f) (ii)) | 1 |
| Offside Rear Lower Direction indicator not working rear O/S indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |