Most common failures | No# failures |
---|
Registration plate issues | 17 |
Headlamp aim out of alignment | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Front Direction indicator incorrect colour |1.5.1b| | 2 |
Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Horn sounds harsh or grating |1.7.3c| | 2 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Central Fuel system component leaking |6.1.3 |b| |i|| | 1 |
Brake lever has inadequate reserve travel right side |3.1.3b| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
An item not tested |Manual| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Horn not working |1.7.3a| | 1 |
Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Brake pedal attachment screws missing. |3.1.2b| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Centre Rear Lower Exhaust mounting missing |7.1.1c| | 1 |
Centre Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on NUMBER PLATE LAMP |1.1.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake linkage excessively damaged |3.2.A1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Rear Motorcycle structure excessively corroded Floor panels, frame n/s, internal box section, rear mudguard area |6.1.1a| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Centre Front Horn is not continous or uniform |1.7.3c| | 1 |
Horn control defective |1.7.2a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Fuel system component leaking (7.2.1a) | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Centre Rear Stop lamp affected by the operation of another lamp (1.3.2) | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Centre Upper Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |