>

MOT History from tests of petrol PIAGGIO VESPAs year 1980

Review the list of common PIAGGIO VESPA failures below or to perform a specific mot history check on your PIAGGIO then use our popular KnowYourCar service

mot history
Pass percent:79.44%
(The average a petrol PIAGGIO VESPA year 1980 passes without issue)
Based on:681 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment23
Registration plate issues17
Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|11
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||10
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||8
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|7
Front wheel bearings have excessive free play |2.3.5b|6
Throttle operating incorrectly |6.2.1f|6
Front wheel bearings are excessively rough |2.3.5b|6
Front position lamp does not illuminate immediately when switched on |1.1.3a|4
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|4
Stop lamp not working |4.3.1 |a| |ii||4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|3
Horn control defective |1.7.2a|3
Horn not loud enough to be heard by another road user |1.7.3a|3
Steering headbearing has excessive free play |2.2.2|3
Front Front wheel bearings are excessively rough |2.3.5b|3
Riders seat insecure |6.2.1a|3
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|3
Headlamp main beam affected by the operation of another lamp |1.2.2c|3
Front Brake lever has inadequate reserve travel |3.1.3b|3
Rear Brake pedal has inadequate reserve travel |3.1.3b|3
Headlamp not working on main beam |4.1.1 |a| |ii||3
Horn sounds harsh or grating |1.7.3c|3
Front Position lamp not working |4.2.1 |a||2
Nearside Rear Direction indicators not working |1.5.1c|2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Motorcycle structure excessively corroded |6.1.1a|2
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Indicator tell tale not functioning |1.5.2|2
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Headlamp insecure |1.2.3b|2
Fuel tank leaking |7.2.1a|2
Fuel cap mounting flange/sealing method defective |7.2.2c|2
Headlamp not working on dipped beam |4.1.1 |a| |ii||2
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||2
Rear Position lamp not working (4.2.1 (a))2
Stop lamp remains on when the brakes are released1
Rear Lower Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Rear Upper Direction indicator affected by the operation of another lamp |1.5.1c|1
Front Upper Direction indicator affected by the operation of another lamp |1.5.1c|1
Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Front Lower Horn not working |1.7.3a|1
Front Direction indicator not working |1.5.1c|1
Offside Rear Direction indicator insecure |1.5.3b|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Centre Front Headlamp incorrect colour |1.2.1|1
Horn not working |1.7.3a|1
Headlamp deteriorated and function impaired |1.2.3a|1
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Headlamp dipped beam affected by the operation of the horn |1.2.2c|1
Headlamp main beam affected by the operation of the horn |1.2.2c|1
Headlamp damaged and function impaired |1.2.3a|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Front Direction indicator flashing less than 60 times a minute |1.5.1c|1
Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Front Floor brake test indicates a severely grabbing brake |3.3.C2d|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Front Direction indicator not working |1.5.1c|1
Front Direction indicator affected by the operation of another lamp |1.5.1c|1
Rear Direction indicator affected by the operation of another lamp |1.5.1c|1
Front Horn not loud enough to be heard by another road user |1.7.3a|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Rear Rear wheel rotation likely to be impeded |6.2.1b|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Centre Front Brake pedal attachment screws loose |3.1.2b|1
Direction indicators not working |1.5.1c|1
Nearside Rear Direction indicator not working |1.5.1c|1
Rear wheel has a loose wheel nut|s| |4.2.3a|1
Nearside Front Direction indicators not working |1.5.1c|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Rear wheel spindle securing nut|s| loose |2.4.A.2b|1
Rear Brake locking device insecure |3.2.A1e|1
Front Throttle operating incorrectly |6.2.1f|1
Nearside Front Direction indicator missing |1.5.1a|1
Offside Front Direction indicator missing |1.5.1a|1
Rear position lamp missing |1.1.1a|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Stop lamp insecure |1.3.3b|1
Lower Motorcycle structure excessively corroded |6.1.1a|1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Rear position lamp deteriorated and function impaired |1.1.1b|1
Nearside Steering lock stop maladjusted |2.1.3|1
Fuel system component leaking |7.2.1a|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Steering lock stop missing |2.1.3|1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Position lamp not working |4.2.1 |a||1
Rear Brake drum contaminated gearbox oil leaking |1.1.14 |b||1
Rear reflector on motorcycle missing |1.4.1|1
Offside Front Direction indicators not working |1.5.1c|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Steering headbearing has excessive free play |2.2.2|1
Inner Rear Upper Motorcycle structure excessively corroded |6.1.1a|1
Exhaust excessively deteriorated |7.1.1a|1
Brake lever has inadequate reserve travel |3.1.3b|1
Front Horn not working |1.7.3a|1
Front Brake lever is inoperative |3.1.3c|1
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a|1
Fuel cap sealing washer deteriorated |7.2.2c|1
Rear position lamp incorrect colour |1.1.2b|1
Direction indicators not working all four |1.5.1c|1
Offside Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f||1
Nearside Front Brake cable insecure |1.1.15 |c||1
Central Lower Motorcycle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||1
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii||1
Front Direction indicators not working |1.5.1c|1
Offside Rear Direction indicators not working |1.5.1c|1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Front Brake excessively binding (1.2.1 (f))1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Riders seat insecure (6.2.5 (a) (ii))1
Front Upper Front position lamp does not illuminate immediately when switched on (1.1.3a)1
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle stiff entire range and no return (6.2.7 (a) (ii))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Horn not working (7.7 (a) (ii))1
Central Upper Riders seat insecure Seat lock missing. (6.2.5 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy