Most common failures | No# failures |
---|
Registration plate issues | 8 |
Front Brake excessively binding (1.2.1 (f)) | 8 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 6 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Headlamp aim out of alignment | 3 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Fuel cap missing (6.1.3 (b) (i)) | 1 |
Stop lamp not working Front Brake (4.3.1 (a) (ii)) | 1 |
Nearside Front Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Front Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Offside Front Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Shock absorber has a serious fluid leak front forks both leaking excessively (5.3.2 (b)) | 1 |
Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Front Lower Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Steering headbearing excessively stiff or notchy excessively notchy (2.2.2 (f) (i)) | 1 |
Front Shock absorber has a serious fluid leak front forks leaking oil excessively (5.3.2 (b)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Shock absorber has a serious fluid leak front forks leaking excessively (5.3.2 (b)) | 1 |
Steering linkage locking device ineffective steering lock ineffective to the left , handlebars turn too much (2.1.3 (d)) | 1 |
Offside Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake lever has restricted free movement (1.1.15 (e)) | 1 |
Rear Brake lever has insufficient reserve travel Adjusted (1.1.2 (a)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Offside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |