Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Registration plate lamp issues | 11 |
Registration plate issues | 8 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 7 |
Front Brake excessively binding (1.2.1 (f)) | 6 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Horn not working (7.7 (a) (ii)) | 5 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Stop lamp remains on when the brakes are released | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Horn not working (7.7 (a)) | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
Headlamp aim not tested (4.1.2 (b)) | 3 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 2 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Horn not working (7.7 (a) (ii)) | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 2 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
All direction indicators light intensity significantly reduced |4.4.3 |a|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock no lock stop on right lock |2.1.4 |a|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Lower Shock absorber insecurely attached mounting bolt loose |5.3.2 |a| |i|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Suspension component pin or bush excessively worn engine mount |5.3.4 |a| |i|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected pulling hard to nearside |2.2.2 |f| |ii|| | 1 |
Rear Suspension component pin or bush excessively worn Main engine to frame bushes, excessive lateral movement |5.3.4 |a| |i|| | 1 |
Nearside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp not working when front brake is applied (4.3.1 (a) (ii)) | 1 |
Stop lamp not working Bulb (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort Warped disc (1.2.1 (e)) | 1 |
Headlamp aim not tested Low beam not working (4.1.2 (b)) | 1 |
Rear Wheel fixing loose (single fixing) Nut loose? (5.2.1 (a) (ii)) | 1 |
Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement Cradle bearings wornout? may want bolts retightening. (6.1.8 (a) (i)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Suspension rod pin or bush excessively worn ENGINE PIVOT BEARINGS WORN TO EXCESS (5.3.4 (a) (i)) | 1 |
Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Brake lever pivot has excessive free play (1.1.1 (b)) | 1 |
All position lamps not working Front and rear position lamps do not operate . (4.2.1 (a)) | 1 |
Nearside Motorcycle structure joining/attachment plate or fastening insecure nearside body work covering foot placement insecure . (6.1.1 (b) (i)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Front Steering operation fouling on the fuel tank or bodywork on full lock steering lockstops not effective, handlebar lower cover fouls front panel (2.1.4 (b)) | 1 |
Stop lamp not working not working when front brake applied (4.3.1 (a) (ii)) | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Front Headlamp light intensity severely reduced main and dipped beam intensity severly reduced (4.1.4 (a)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen reduced lamp intensity prevented headlamp aim from being tested (4.1.2 (a)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Shock absorber has a serious fluid leak both fork seals leaking (5.3.2 (b)) | 1 |
Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Lower Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Suspension arm pin or bush excessively worn nearside offside (5.3.4 (a) (i)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Steering headbearing has excessive wear or free play bearing loose (2.2.2 (f) (i)) | 1 |
Engine mounting/bracket bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Nearside Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
Rear Wheel fixing loose (single fixing) wheel lose (5.2.1 (a) (ii)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Front Brake performance not tested pads fitted wrong way around (1.2.1 (g)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak Front right fork has an excessive oil leak. (5.3.2 (b)) | 1 |
Front Brake excessively binding Front brake binding excessively. (1.2.1 (f)) | 1 |
Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Shock absorber has negligible damping effect no damping effect front forks (5.3.2 (b)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Steering operation restricted in free movement from lock to lock steering fouling in right hand lock (2.1.4 (c)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp Affected by indicators (4.2.3 (b)) | 1 |
Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |