Most common failures | No# failures |
---|
Headlamp aim out of alignment | 44 |
Rear reflector on motorcycle missing |1.4.1| | 29 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 21 |
Exhaust is leaking and excessively noisey |7.1.1b| | 18 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 18 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 18 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
Steering headbearing has excessive free play |2.2.2| | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 9 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 9 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Nearside Steering lock stop ineffective |2.1.3| | 8 |
Fuel cap sealing washer missing |7.2.2c| | 8 |
Throttle operating incorrectly |6.2.1f| | 7 |
Exhaust excessively deteriorated |7.1.1a| | 7 |
Nearside Indicator tell tale not functioning |1.5.2| | 7 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Offside Steering lock stop ineffective |2.1.3| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Horn not working |1.7.3a| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 5 |
Riders seat insecure |6.2.1a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Front suspension has inadequate damping effect. |2.3.6c| | 5 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Registration plate issues | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Headlamp aim not tested |1.6| | 3 |
Nearside Indicator tell tale not operating correctly |1.5.2| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front suspension assembly component excessively corroded. |2.3.1| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Front mudguard insecure |2.3.7| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front suspension assembly component loose |2.3.1| | 2 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Offside Indicator tell tale not functioning |1.5.2| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
Offside Front Steering lock stop ineffective |2.1.3| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering lock stop missing |2.1.3| | 2 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Rear reflector on motorcycle insecure |1.4.2c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear suspension has severe distortion of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Horn missing |1.7.1| | 1 |
Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Lower Exhaust mounting missing |7.1.1c| | 1 |
Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Plate brake test indicates a severely grabbing brake |3.3.B1b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Indicator switch defective |1.5.4| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Outer Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Outer Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front An item not tested |Manual| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Suspension arm insecurely attached |5.3.3 |a| |i|| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Horn control defective |1.7.2a| | 1 |
Offside Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Front mudguard insecure |2.3.7| | 1 |
Nearside Front Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Offside Front Steering damper in such a condition that the steering action is impaired. |2.1.2d| | 1 |
Centre Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Front Steering lock stop missing |2.1.3| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front suspension has an inadequate repair of a load bearing member or its supporting structure. damage to stanchion |2.3.8| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Steering lock stop missing |2.1.3| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front Lower Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Steering headbearing has excessive wear or free play Exessive freeplay (2.2.2 (f) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Front Front wheel bearings have excessive free play (2.3.5b) | 1 |
Centre Rear Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Rear Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |
Front Steering linkage locking device ineffective (2.1.3 (d)) | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |