| Most common failures | No# failures |
|---|
| Registration plate issues | 8 |
| Headlamp aim out of alignment | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Horn not working |1.7.3a| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp aim not tested Obscured (4.1.2 (b)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |