| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Registration plate issues | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Riders seat insecure |6.2.1a| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Offside Rear Direction indicators not working |1.5.1c| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Nearside Direction indicator not working |1.5.1c| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Plate brake test indicates a sticking brake |3.3.B1a| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 2 |
| Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Nearside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Indicator tell tale not operating correctly |1.5.2| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Suspension arm pin or bush excessively worn swinging arm/ engine mount (5.3.4 (a) (i)) | 1 |
| All direction indicators incorrect colour (4.4.3 (a)) | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Centre Rear Motorcycle structure adversely modified |6.1.1b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Built up wheel has a loose bolt/s |4.2.1c| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
| Plate brake test Neither brake control achieves an efficiency of 25% |3.3.B2b| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies Doesn`t operate off front brake lever |1.3.1a| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Brake cable badly frayed |3.2.A1b| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Lower Motorcycle structure cracked |6.1.1a| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |