Most common failures | No# failures |
---|
Headlamp aim out of alignment | 21 |
Registration plate issues | 15 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Riders seat insecure |6.2.1a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Horn not working |1.7.3a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Indicator tell tale not functioning |1.5.2| | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp aim not tested |1.6| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Rear wheel insecure |4.2.3b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Stop lamp deteriorated and function impaired |1.3.3a| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
An item not tested |Manual| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Central Front Upper Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Central Rear Lower Position lamp not working (4.2.1 (a)) | 1 |
Central Front Upper Position lamp not working (4.2.1 (a)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Centre Upper An item not tested |Manual| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front position lamp obscured more than 50% |1.1.1d| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Rear position lamp does not face the rear |1.1.1d| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Built up wheel has a bolt/s missing |4.2.1c| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Front Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Direction indicator not working front rear |1.5.1c| | 1 |
Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Rear Riders seat insecure |6.2.1a| | 1 |
Rear Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Indicator tell tale not operating correctly |1.5.2| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Upper Motorcycle structure is fractured and structural rigidity is significantly reduced under seat at rear suspension mounting point (6.1.1 (a) (i)) | 1 |
Centre Front Upper Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Forks insecure (2.2.2 (d) (i)) | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front wheel has a missing wheel stud|s| |4.2.3a| | 1 |
Rear spring worn and seriously weakened |2.4A1b|ii|| | 1 |
Steering operation restricted in free movement from lock to lock NOTCHY |2.1.4 |c|| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Outer Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel insecure |4.2.3b| | 1 |