Most common failures | No# failures |
---|
Registration plate issues | 13 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Headlamp aim out of alignment | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Indicator tell tale not functioning |1.5.2| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Centre Front Brake performance not tested |3.3| | 1 |
Centre Rear Brake performance not tested |3.3| | 1 |
Centre Front Headlamp aim not tested |1.6| | 1 |
Outer Rear Headlamp aim not tested |1.6| | 1 |
An item not tested |Manual| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear wheel has a missing wheel stud|s| |4.2.3a| | 1 |
Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Front Lower Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Centre Rear Lower Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Front Lower Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Upper Headlamp switch faulty |1.2.4| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Upper Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Direction indicator flashing less than 60 times a minute both |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Brake pedal mounting cracked . |3.1.2c| | 1 |
Centre Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Fuel cap sealing washer torn |7.2.2c| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Front Brake cable guide defective and affecting operation |1.1.15 |d|| | 1 |
Rear Brake cable guide defective and affecting operation |1.1.15 |d|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Front wheel bearings have excessive free play (2.3.5b) | 1 |
Front Front wheel bearings are excessively rough (2.3.5b) | 1 |
Horn not working (1.7.3a) | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |