Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 85 |
Steering headbearing has excessive free play |2.2.2| | 42 |
Headlamp aim out of alignment | 37 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 30 |
Horn not working |1.7.3a| | 22 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 19 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 19 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 19 |
Exhaust is leaking and excessively noisey |7.1.1b| | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 15 |
Rear Rear reflector on motorcycle missing |1.4.1| | 14 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 13 |
Registration plate issues | 13 |
Throttle operating incorrectly |6.2.1f| | 13 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
Rear reflector missing |4.8.2 |a| |ii|| | 10 |
Stop lamp remains on when the brake is released |1.3.1e| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 9 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 9 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 9 |
Riders seat insecure |6.2.1a| | 8 |
Rear reflector missing (4.8.2 (a) (ii)) | 8 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Steering headbearing has excessive free play |2.2.2| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front suspension has inadequate damping effect. |2.3.6c| | 5 |
Stop lamp remains on when the brakes are released | 5 |
Direction indicators not working |1.5.1c| | 5 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 4 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 4 |
Front Stop lamp emits other than a steady red light |1.3.1b| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Nearside Direction indicator not working |1.5.1c| | 3 |
Stop lamp does not emit a steady light |1.3.1b| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Horn not working |1.7.3a| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Direction indicator not working |1.5.1c| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Stop lamp emits other than a steady red light |1.3.1b| | 3 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Exhaust mounting missing |7.1.1c| | 3 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Offside Front Shock absorber has an excessively worn bush (5.3.2 (c)) | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Fuel system component leaking |6.1.3 |b| |i|| | 2 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Indicator switch defective |1.5.4| | 2 |
Offside Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front position lamp incorrect colour |1.1.2a| | 2 |
Offside Front position lamp incorrect colour |1.1.2a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear Brake component has an inadequate repair |3.1.5| | 2 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Front Stop lamp does not emit a steady light |1.3.1b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 2 |