| Most common failures | No# failures |
|---|
| Riders seat insecure |6.2.1a| | 11 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
| Headlamp aim out of alignment | 9 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 7 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
| Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Registration plate issues | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| An item not tested |Manual| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Horn not working |1.7.3a| | 2 |
| Nearside Direction indicators not working |1.5.1c| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Offside Front An item not tested |Manual| | 1 |
| Nearside Front Brake lever insecure |3.1.2a| | 1 |
| Upper Riders seat insecure |6.2.1a| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Nearside Brake lever insecure |3.1.2a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake lever mounting insecure |3.1.2a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear suspension bush has excessive free play swinging arm to engine bush |2.4.A2a|i|| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Brake lever mounting cracked |3.1.2c| | 1 |
| Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Nearside Rear Brake lever insecure |3.1.2a| | 1 |
| Nearside Rear Brake lever mounting cracked |3.1.2c| | 1 |
| Direction indicator insecure |1.5.3b| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Inner Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Handlebar mounting clamp loose |2.1.1a| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |