Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 28 |
Front wheel bearings have excessive free play |2.3.5b| | 21 |
Exhaust is leaking and excessively noisey |7.1.1b| | 14 |
Steering headbearing has excessive free play |2.2.2| | 14 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
Front wheel bearings are excessively rough |2.3.5b| | 12 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 12 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Nearside Indicator tell tale not functioning |1.5.2| | 8 |
Fuel cap sealing washer missing |7.2.2c| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Riders seat insecure |6.2.1a| | 7 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Registration plate issues | 7 |
Nearside Rear Direction indicator not working |1.5.1c| | 6 |
Indicator tell tale not functioning |1.5.2| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Horn not working |1.7.3a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Front Front wheel bearings are excessively rough |2.3.5b| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Headlamp aim not tested |1.6| | 5 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Horn control defective |1.7.2a| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Front position lamp insecure |1.1.1c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Indicator tell tale not operating correctly |1.5.2| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn sounds harsh or grating |1.7.3c| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Rear Brake cable badly frayed |3.2.A1b| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp switch faulty high and low beam wrong way round |1.2.4| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Fuel cap sealing washer missing |7.2.2c| | 1 |
Brake component is excessively corroded |3.1.5| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear suspension bush has excessive free play engine mounts |2.4.A2a|i|| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake performance not tested |3.3| | 1 |
Offside Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Upper Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Steering lock stop missing |2.1.3| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Lower Exhaust mounting missing |7.1.1c| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Indicator tell tale not operating correctly |1.5.2| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel cap mounting flange/sealing method defective unable to unlock seat to inspect cap |7.2.2c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Brake component modification unsafe |1.1.21 |d| |i|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |