Most common failures | No# failures |
---|
Headlamp aim out of alignment | 137 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 87 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 67 |
Exhaust is leaking and excessively noisey |7.1.1b| | 61 |
Horn not working |1.7.3a| | 52 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 50 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 49 |
Riders seat insecure |6.2.1a| | 49 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 36 |
Registration plate issues | 26 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 21 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 21 |
Fuel cap sealing washer missing |7.2.2c| | 20 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 19 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 18 |
Throttle operating incorrectly |6.2.1f| | 16 |
Steering headbearing has excessive free play |2.2.2| | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Direction indicators not working |1.5.1c| | 16 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 15 |
Exhaust excessively deteriorated |7.1.1a| | 14 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 13 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Stop lamp remains on when the brake is released |1.3.1e| | 11 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 8 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 8 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 8 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
All direction indicators not working (4.4.1 (a) (ii)) | 7 |
Nearside Front Direction indicator not working |1.5.1c| | 7 |
Motorcycle structure excessively corroded |6.1.1a| | 7 |
Front suspension has inadequate damping effect. |2.3.6c| | 7 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 7 |
Headlamp aim not tested |1.6| | 7 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 7 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 7 |
Stop lamp remains on when the brakes are released | 6 |
Front Horn not working |1.7.3a| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 6 |
Horn control defective |1.7.2a| | 6 |
Horn not working (7.7 (a) (ii)) | 6 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 6 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 5 |
Offside Steering lock stop ineffective |2.1.3| | 5 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 5 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Fuel system component leaking |7.2.1a| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 4 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Rear wheel insecure |4.2.3b| | 4 |
Riders seat insecure (6.2.5 (a) (ii)) | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 4 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 4 |
Nearside Direction indicator not working |1.5.1c| | 4 |
Offside Indicator tell tale not functioning |1.5.2| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
Headlamp switch faulty |1.2.4| | 4 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
Headlamp aim not tested (4.1.2 (b)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Rear Brake lever mounting insecure |3.1.2a| | 3 |
Rear Brake lever mounting cracked |3.1.2c| | 3 |
Front suspension assembly component excessively bent |2.3.1| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Front Direction indicator not working |1.5.1c| | 3 |
Rear Direction indicator not working |1.5.1c| | 3 |
Rear Direction indicators not working |1.5.1c| | 3 |
Front Motorcycle structure excessively corroded |6.1.1a| | 3 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 3 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 3 |
Fuel hose leaking |7.2.1a| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Front Direction indicator insecure |1.5.3b| | 3 |
Lower Motorcycle structure excessively corroded |6.1.1a| | 3 |
Rear wheel rotation likely to be impeded |6.2.1b| | 3 |
Nearside Steering lock stop ineffective |2.1.3| | 3 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Centre Lower Motorcycle structure excessively corroded |6.1.1a| | 3 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Riders seat insecure (6.2.1a) | 3 |
Nearside Indicator tell tale not functioning (1.5.2) | 3 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 3 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |