Most common failures | No# failures |
---|
Headlamp aim out of alignment | 87 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 51 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 51 |
Exhaust is leaking and excessively noisey |7.1.1b| | 35 |
Riders seat insecure |6.2.1a| | 34 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 29 |
Horn not working |1.7.3a| | 23 |
Fuel cap sealing washer missing |7.2.2c| | 22 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 21 |
Direction indicators not working |1.5.1c| | 20 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 20 |
Registration plate issues | 19 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 16 |
Horn not loud enough to be heard by another road user |1.7.3a| | 14 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 13 |
Steering headbearing has excessive free play |2.2.2| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 10 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 9 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 8 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Exhaust excessively deteriorated |7.1.1a| | 6 |
Offside Front Direction indicator not working |1.5.1c| | 6 |
Front Direction indicators not working |1.5.1c| | 6 |
Front Steering headbearing has excessive free play |2.2.2| | 6 |
Headlamp aim not tested |1.6| | 6 |
Nearside Indicator tell tale not functioning |1.5.2| | 6 |
Nearside Front Direction indicator not working |1.5.1c| | 6 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 5 |
Rear Direction indicators not working |1.5.1c| | 5 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Direction indicator not working |1.5.1c| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Stop lamp remains on when the brakes are released | 5 |
Headlamp insecure |1.2.3b| | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Indicator switch defective |1.5.4| | 4 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Stop lamp affected by the operation of another lamp |1.3.2| | 4 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
All direction indicators not working (4.4.1 (a) (ii)) | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 4 |
Rear Brake lever insecure |3.1.2a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Front Riders seat insecure |6.2.1a| | 3 |
Horn is not a constant note |1.7.3c| | 3 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Direction indicator obscured |1.5.1a| | 3 |
Offside Direction indicator not working |1.5.1c| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 3 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
An item not tested |Manual| | 3 |
Horn control defective |1.7.2a| | 3 |
Offside Indicator tell tale not functioning |1.5.2| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Brake lever mounting insecure |3.1.2a| | 2 |
Front Stop lamp does not emit a steady light |1.3.1b| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Motorcycle structure excessively corroded |6.1.1a| | 2 |
Rear position lamp missing |1.1.1a| | 2 |
Stop lamp missing |1.3.3a| | 2 |
Centre Motorcycle structure excessively corroded |6.1.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |