Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Central Rear Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp switch insecure (4.2.2 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Rear suspension component cracked |2.4.A.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear suspension component cracked |2.4.A.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |