>

MOT History from tests of petrol PGO T-REXs year 2007

Review the list of common PGO T-REX failures below or to perform a specific mot history check on your PGO then use our popular KnowYourCar service

mot history
Pass percent:76.83%
(The average a petrol PGO T-REX year 2007 passes without issue)
Based on:315 MOT Tests
Most common failuresNo# failures
Rear Brake lever has inadequate reserve travel |3.1.3b|13
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Exhaust is leaking and excessively noisey |7.1.1b|7
Headlamp aim out of alignment6
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Registration plate issues4
Horn not working |1.7.3a|4
Front Roller brake test indicates a binding brake |3.3.A1a|4
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Direction indicators not working |1.5.1c|3
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Headlamp aim beam image kick up to the offside |1.6|2
Stop lamp affected by the operation of another lamp |1.3.2|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Front Floor brake test indicates a binding brake |3.3.C2c|2
Front Brake excessively binding (1.2.1 (f))2
Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear reflector on motorcycle missing |1.4.1|1
Roller brake test indicates a binding brake Front |3.3.A1a|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Direction indicator affected by the operation of another lamp |1.5.1c|1
Steering headbearing has excessive free play |2.2.2|1
Rear wheel spindle securing nut|s| loose |2.4.A.2b|1
Nearside Front Indicator switch insecure |1.5.4|1
Offside Front Throttle operating incorrectly |6.2.1f|1
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||1
Nearside Front Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Offside Front Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Nearside Rear Rear position lamp missing inoperative |1.1.1a|1
Front Stop lamp does not emit a steady light |1.3.1b|1
Rear Stop lamp does not emit a steady light |1.3.1b|1
Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Fuel cap sealing washer torn |7.2.2c|1
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Floor brake test indicates a sticking brake |3.3.C2c|1
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Front Front wheel spindle securing nut|s| loose |2.3.5a|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Front Motorcycle structure excessively damaged |6.1.1a|1
Offside Front Front position lamp damaged and function impaired |1.1.1b|1
Nearside Rear Direction indicator damaged and function impaired |1.5.3a|1
Brake lever cannot be applied smoothly |3.1.3d|1
Fuel hose leaking |7.2.1a|1
Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii||1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Front Wheel has an excessively eccentric bead rim. |4.2.2|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Centre Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Nearside Direction indicator not working |1.5.1c|1
Headlamp aim not tested |4.1.2 |b||1
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b||1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Direction indicators flashing less than 60 times a minute |1.5.1c|1
Stop lamp does not emit a steady light |1.3.1b|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Offside Footrest insecure |6.2.1a|1
Centre Front Headlamp dipped beam affected by the operation of the horn |1.2.2c|1
Rear Rear wheel has a loose wheel nut|s| |4.2.3a|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Rear position lamp insecure |1.1.1c|1
Rear Direction indicator insecure |1.5.3b|1
Front Direction indicator flashing less than 60 times a minute |1.5.1c|1
Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Front Rear wheel rotation likely to be impeded |6.2.1b|1
Throttle operating incorrectly |6.2.1f|1
Headlamp aim not tested |1.6|1
Front Brake master cylinder fluid level dangerously low |3.2.B1d|1
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b|1
Front Floor brake test indicates a sticking brake |3.3.C2c|1
Horn not working |7.7 |a| |ii||1
Offside Front Position lamp not working |4.2.1 |a||1
Offside Rear Position lamp not working |4.2.1 |a||1
Offside Front Direction indicator obviously incorrectly positioned |4.4.3 |a||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Front Stop lamp not working (4.3.1 (a) (ii))1
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy