MOT History from tests of petrol PEUGEOT TREKKERs year 2002

Review the list of common PEUGEOT TREKKER failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:71.62%

(The average a petrol PEUGEOT TREKKER year 2002 passes without issue)

Based on:1,279 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	52
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	35
Steering headbearing has excessive free play \|2.2.2\|	34
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	29
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	27
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	21
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	17
Registration plate issues	16
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	15
Rear reflector on motorcycle missing \|1.4.1\|	14
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	14
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	13
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Exhaust is leaking and excessively noisey \|7.1.1b\|	11
Horn not working \|1.7.3a\|	11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	9
Front Brake lever has inadequate reserve travel \|3.1.3b\|	9
Headlamp insecure \|1.2.3b\|	8
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	8
Front Steering headbearing has excessive free play \|2.2.2\|	7
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	7
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	7
Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	6
Offside Front Direction indicators not working \|1.5.1c\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Front Front suspension has inadequate damping effect. \|2.3.6c\|	5
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	5
Indicator switch defective \|1.5.4\|	5
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	5
Headlamp aim not tested \|1.6\|	5
Rear reflector missing (4.8.2 (a) (ii))	5
Offside Rear Direction indicator not working \|1.5.1c\|	4
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	4
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Horn not loud enough to be heard by another road user \|1.7.3a\|	4
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	4
Nearside Rear Direction indicator insecure \|1.5.3b\|	4
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	4
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	4
Brake lever has insufficient reserve travel (1.1.2 (a))	4
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	3
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Riders seat insecure \|6.2.1a\|	3
Front Horn not working \|1.7.3a\|	3
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	3
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	3
Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	3
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Fuel cap sealing washer missing \|7.2.2c\|	2
Rear wheel insecure \|4.2.3b\|	2
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Fuel system component leaking \|7.2.1a\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Brake lever mounting insecure \|3.1.2a\|	2
Offside Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Front Stop lamp does not emit a steady light \|1.3.1b\|	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Headlamp main beam affected by the operation of the horn \|1.2.2c\|	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Offside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Rear Brake lever insecure \|3.1.2a\|	2
Direction indicators not working \|1.5.1c\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Front suspension assembly component excessively bent \|2.3.1\|	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
An item not tested \|Manual\|	2
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	2
Offside Front Direction indicator incorrect colour \|1.5.1b\|	2
Stop lamp not working (4.3.1 (a) (ii))	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Front Brake disc contaminated (1.1.14 (b))	2
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	2
Rear Brake excessively binding (1.2.1 (f))	2
Headlamp not working on main beam (4.1.1 (a) (ii))	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	52
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	35
Steering headbearing has excessive free play \|2.2.2\|	34
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	29
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	27
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	21
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	17
Registration plate issues	16
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	15
Rear reflector on motorcycle missing \|1.4.1\|	14
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	14
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	13
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Exhaust is leaking and excessively noisey \|7.1.1b\|	11
Horn not working \|1.7.3a\|	11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	9
Front Brake lever has inadequate reserve travel \|3.1.3b\|	9
Headlamp insecure \|1.2.3b\|	8
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	8
Front Steering headbearing has excessive free play \|2.2.2\|	7
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	7
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	7
Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	6
Offside Front Direction indicators not working \|1.5.1c\|	6
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Front suspension has inadequate damping effect. \|2.3.6c\|	5
Front Front suspension has inadequate damping effect. \|2.3.6c\|	5
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	5
Indicator switch defective \|1.5.4\|	5
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	5
Headlamp aim not tested \|1.6\|	5
Rear reflector missing (4.8.2 (a) (ii))	5
Offside Rear Direction indicator not working \|1.5.1c\|	4
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	4
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Horn not loud enough to be heard by another road user \|1.7.3a\|	4
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	4
Nearside Rear Direction indicator insecure \|1.5.3b\|	4
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	4
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	4
Brake lever has insufficient reserve travel (1.1.2 (a))	4
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	3
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Riders seat insecure \|6.2.1a\|	3
Front Horn not working \|1.7.3a\|	3
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	3
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Offside Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front Fairings insecure and likely to impede the steering \|2.1.2e\|	3
Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	3
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Fuel cap sealing washer missing \|7.2.2c\|	2
Rear wheel insecure \|4.2.3b\|	2
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Fuel system component leaking \|7.2.1a\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Brake lever mounting insecure \|3.1.2a\|	2
Offside Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Front Stop lamp does not emit a steady light \|1.3.1b\|	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Headlamp main beam affected by the operation of the horn \|1.2.2c\|	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Nearside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Offside Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Rear Brake lever insecure \|3.1.2a\|	2
Direction indicators not working \|1.5.1c\|	2
Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Front suspension assembly component excessively bent \|2.3.1\|	2
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Offside Rear Direction indicators not working \|1.5.1c\|	2
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
An item not tested \|Manual\|	2
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	2
Offside Front Direction indicator incorrect colour \|1.5.1b\|	2
Stop lamp not working (4.3.1 (a) (ii))	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Front Brake disc contaminated (1.1.14 (b))	2
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	2
Rear Brake excessively binding (1.2.1 (f))	2
Headlamp not working on main beam (4.1.1 (a) (ii))	2
Rear Stop lamp not working (4.3.1 (a) (ii))	2

MOT History from tests of petrol PEUGEOT TREKKERs year 2002

Find us on Facebook