MOT History from tests of petrol PEUGEOT LUDIXs year 2007

Review the list of common PEUGEOT LUDIX failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history

Pass percent:80.05%

(The average a petrol PEUGEOT LUDIX year 2007 passes without issue)

Based on:2,953 MOT Tests

Most common failures	No# failures
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	70
Headlamp aim out of alignment	68
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	58
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	38
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	35
Exhaust is leaking and excessively noisey \|7.1.1b\|	28
Steering headbearing has excessive free play \|2.2.2\|	28
Horn not working \|1.7.3a\|	26
Registration plate issues	23
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	19
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	14
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	14
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	14
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	13
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	13
Rear wheel rotation likely to be impeded \|6.2.1b\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	11
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	11
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	10
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	10
Horn not loud enough to be heard by another road user \|1.7.3a\|	9
Front Brake lever has inadequate reserve travel \|3.1.3b\|	9
Rear wheel bearings have excessive free play \|2.4.A.2c\|	9
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Nearside Rear Direction indicator not working \|1.5.1c\|	9
Front suspension has inadequate damping effect. \|2.3.6c\|	8
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	8
Direction indicators affected by the operation of another lamp \|1.5.1c\|	8
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	8
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	7
Offside Front Direction indicator incorrect colour \|1.5.1b\|	7
Fuel cap sealing washer missing \|7.2.2c\|	7
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	7
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Front wheel bearings are excessively rough \|2.3.5b\|	6
Rear wheel insecure \|4.2.3b\|	6
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	6
Throttle operating incorrectly \|6.2.1f\|	6
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	6
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	6
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	5
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	5
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	5
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	5
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	5
Front Valve stem seriously damaged (5.2.3 (j))	5
Headlamp aim not tested \|1.6\|	5
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	5
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	5
Rear reflector on motorcycle missing \|1.4.1\|	5
Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	5
Rear Direction indicator incorrect colour \|1.5.1b\|	5
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	5
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	5
Direction indicator incorrect colour \|1.5.1b\|	4
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front wheel bearings have excessive free play \|2.3.5b\|	4
Front Headlamp insecure \|1.2.3b\|	4
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Fuel system component insecure \|7.2.1b\|	4
Front Front wheel bearings are excessively rough \|2.3.5b\|	4
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front Direction indicator incorrect colour \|1.5.1b\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Stop lamp affected by the operation of another lamp \|1.3.2\|	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Exhaust mounting missing \|7.1.1c\|	3
Handlebar mounting clamp loose \|2.1.1a\|	3
Steering lock stop missing \|2.1.3\|	3
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Nearside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Offside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	3
Fairings insecure and likely to impede the steering \|2.1.2e\|	3
Headlamp insecure \|1.2.3b\|	3
Offside Steering lock stop ineffective \|2.1.3\|	3
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	3
Rear Valve stem seriously damaged (5.2.3 (j))	3
Rear Position lamp not working (4.2.1 (a))	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	3
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	3
Front Floor brake test indicates a binding brake \|3.3.C2c\|	3
Rear Brake lever insecure \|3.1.2a\|	3
Lower Steering headbearing has excessive free play \|2.2.2\|	3
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Indicator switch insecure \|1.5.4\|	3
Front Steering headbearing has excessive free play \|2.2.2\|	3
Nearside Front Direction indicators not working \|1.5.1c\|	3
Riders seat insecure \|6.2.1a\|	3
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	3
Exhaust is leaking and excessively noisey (7.1.1b)	3
Front position lamp incorrect colour \|1.1.2a\|	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Rear Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Offside Direction indicator not working \|1.5.1c\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front mudguard insecure \|2.3.7\|	2
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Front Braking system does not have an approriate system/s fitted according to its age \|3.1.1\|	2
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	2
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Stop lamp affected by the operation of the horn \|1.3.2\|	2
Rear position lamp adversely affected by the operation of the horn \|1.1.3b\|	2
Steering headbearing has excessive free play (2.2.2)	2
Front Brake performance not tested \|3.3\|	2
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	2
Fuel system component leaking \|7.2.1a\|	2
Rear Brake excessively binding (1.2.1 (f))	2
Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a))	2
Front Brake hose fouling \|3.2.B3b\|	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	2
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Front Horn not working \|1.7.3a\|	2
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Horn not working \|7.7 \|a\| \|ii\|\|	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Nearside Steering lock stop ineffective \|2.1.3\|	2
Rear Brake performance not tested \|3.3\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	2
Floor brake test Neither brake control achieves an efficiency of 25% \|3.3.C1b\|	2
Rear Brake lever cannot be released smoothly \|3.1.3d\|	2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Rear Front mudguard insecure \|2.3.7\|	2
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Front Direction indicators not working \|1.5.1c\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Nearside Front Upper Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Fuel system component leaking (6.1.3 (b) (i))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	70
Headlamp aim out of alignment	68
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	58
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	38
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	35
Exhaust is leaking and excessively noisey \|7.1.1b\|	28
Steering headbearing has excessive free play \|2.2.2\|	28
Horn not working \|1.7.3a\|	26
Registration plate issues	23
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	19
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	14
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	14
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	14
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	13
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	13
Rear wheel rotation likely to be impeded \|6.2.1b\|	11
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	11
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	11
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	10
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	10
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	10
Horn not loud enough to be heard by another road user \|1.7.3a\|	9
Front Brake lever has inadequate reserve travel \|3.1.3b\|	9
Rear wheel bearings have excessive free play \|2.4.A.2c\|	9
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Nearside Rear Direction indicator not working \|1.5.1c\|	9
Front suspension has inadequate damping effect. \|2.3.6c\|	8
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	8
Direction indicators affected by the operation of another lamp \|1.5.1c\|	8
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	8
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	7
Offside Front Direction indicator incorrect colour \|1.5.1b\|	7
Fuel cap sealing washer missing \|7.2.2c\|	7
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	7
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Front wheel bearings are excessively rough \|2.3.5b\|	6
Rear wheel insecure \|4.2.3b\|	6
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	6
Throttle operating incorrectly \|6.2.1f\|	6
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	6
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	6
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	5
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	5
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	5
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	5
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	5
Front Valve stem seriously damaged (5.2.3 (j))	5
Headlamp aim not tested \|1.6\|	5
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	5
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	5
Rear reflector on motorcycle missing \|1.4.1\|	5
Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	5
Rear Direction indicator incorrect colour \|1.5.1b\|	5
Nearside Brake lever has inadequate reserve travel \|3.1.3b\|	5
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	5
Direction indicator incorrect colour \|1.5.1b\|	4
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	4
Stop lamp remains on when the brake is released \|1.3.1e\|	4
Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front wheel bearings have excessive free play \|2.3.5b\|	4
Front Headlamp insecure \|1.2.3b\|	4
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	4
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Fuel system component insecure \|7.2.1b\|	4
Front Front wheel bearings are excessively rough \|2.3.5b\|	4
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Front Direction indicator incorrect colour \|1.5.1b\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Stop lamp affected by the operation of another lamp \|1.3.2\|	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Exhaust mounting missing \|7.1.1c\|	3
Handlebar mounting clamp loose \|2.1.1a\|	3
Steering lock stop missing \|2.1.3\|	3
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Nearside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Offside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	3
Fairings insecure and likely to impede the steering \|2.1.2e\|	3
Headlamp insecure \|1.2.3b\|	3
Offside Steering lock stop ineffective \|2.1.3\|	3
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	3
Rear Valve stem seriously damaged (5.2.3 (j))	3
Rear Position lamp not working (4.2.1 (a))	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	3
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	3
Front Floor brake test indicates a binding brake \|3.3.C2c\|	3
Rear Brake lever insecure \|3.1.2a\|	3
Lower Steering headbearing has excessive free play \|2.2.2\|	3
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Indicator switch insecure \|1.5.4\|	3
Front Steering headbearing has excessive free play \|2.2.2\|	3
Nearside Front Direction indicators not working \|1.5.1c\|	3
Riders seat insecure \|6.2.1a\|	3
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	3
Exhaust is leaking and excessively noisey (7.1.1b)	3
Front position lamp incorrect colour \|1.1.2a\|	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Rear Rear wheel rotation likely to be impeded \|6.2.1b\|	2
Offside Direction indicator not working \|1.5.1c\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front mudguard insecure \|2.3.7\|	2
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Nearside Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Brake lever has inadequate reserve travel \|3.1.3b\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Front Braking system does not have an approriate system/s fitted according to its age \|3.1.1\|	2
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	2
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	2
Front Shock absorber has negligible damping effect (5.3.2 (b))	2
Stop lamp affected by the operation of the horn \|1.3.2\|	2
Rear position lamp adversely affected by the operation of the horn \|1.1.3b\|	2
Steering headbearing has excessive free play (2.2.2)	2
Front Brake performance not tested \|3.3\|	2
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	2
Fuel system component leaking \|7.2.1a\|	2
Rear Brake excessively binding (1.2.1 (f))	2
Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a))	2
Front Brake hose fouling \|3.2.B3b\|	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	2
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Front Horn not working \|1.7.3a\|	2
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Horn not working \|7.7 \|a\| \|ii\|\|	2
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Nearside Steering lock stop ineffective \|2.1.3\|	2
Rear Brake performance not tested \|3.3\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Centre Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	2
Floor brake test Neither brake control achieves an efficiency of 25% \|3.3.C1b\|	2
Rear Brake lever cannot be released smoothly \|3.1.3d\|	2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Nearside Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	2
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	2
Rear Front mudguard insecure \|2.3.7\|	2
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	2
Front Direction indicators not working \|1.5.1c\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Nearside Front Upper Brake lever has inadequate reserve travel \|3.1.3b\|	2
Rear Direction indicators not working \|1.5.1c\|	2
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	2
Front Brake hose is likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Fuel system component leaking (6.1.3 (b) (i))	2

MOT History from tests of petrol PEUGEOT LUDIXs year 2007

Find us on Facebook