>

MOT History from tests of petrol PEUGEOT ELYSEOs year 2003

Review the list of common PEUGEOT ELYSEO failures below or to perform a specific mot history check on your PEUGEOT then use our popular KnowYourCar service

mot history
Pass percent:77.46%
(The average a petrol PEUGEOT ELYSEO year 2003 passes without issue)
Based on:599 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment19
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||14
Registration plate issues10
Steering headbearing has excessive free play |2.2.2|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|7
Rear shock absorber has inadequate damping effect. |2.4.A.3b|7
Nearside Front shock absorber seal failed and leaking oil |2.3.3|7
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|5
Front Brake lever has inadequate reserve travel |3.1.3b|5
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Front shock absorber seal failed and leaking oil |2.3.3|4
Headlamp aim not tested |1.6|4
Rear Brake lever has inadequate reserve travel |3.1.3b|4
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Horn is not a constant note |1.7.3c|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Fuel pipe leaking |7.2.1a|2
Front Stop lamp missing |1.3.3a|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Front Front wheel bearings are excessively rough |2.3.5b|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Front Hydraulic brake control feels spongy |3.1.4a|2
Front Brake lever is inoperative |3.1.3c|2
Fuel cap sealing washer missing |7.2.2c|2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Brake disc|s| excessively scored |3.2.A1l|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Nearside Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Centre Front Upper Steering headbearing has excessive free play |2.2.2|2
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Front position lamp flickers when tapped lightly by hand |1.1.3c|1
Rear wheel rotation likely to be impeded |6.2.1b|1
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii||1
Rear Stop lamp missing |1.3.3a|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Handlebar mounting clamp loose |2.1.1a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Throttle operating incorrectly Twist grip loose on handlebars |6.2.1f|1
Front Fairings so located that it is likely to impede the steering Handle bar top cover insecure. |2.1.2e|1
Rear Brake pipe inadequately supported |3.2.B2b|1
Rear position lamp incorrect colour |1.1.2b|1
Stop lamp emits other than a steady red light |1.3.1b|1
Nearside Rear Direction indicator incorrect colour |1.5.1b|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Nearside Front suspension assembly component excessively corroded. |2.3.1|1
Offside Front suspension assembly component excessively corroded. |2.3.1|1
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Offside Outer Direction indicators not working |1.5.1c|1
Nearside Outer Direction indicators not working |1.5.1c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Rear wheel insecure |4.2.3b|1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Steering lock stop ineffective |2.1.3|1
Offside Steering lock stop ineffective |2.1.3|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Offside Rear Direction indicators not working |1.5.1c|1
Fuel system component leaking |6.1.3 |b| |i||1
Offside Rear Direction indicator damaged and function impaired |1.5.3a|1
Offside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Exhaust excessively deteriorated |7.1.1a|1
Front wheel bearings are excessively rough |2.3.5b|1
Rear suspension component excessively bent |2.4.A.1a|1
Rear Wheel damaged significantly reducing the original strength |4.2.1a|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Direction indicator not working |1.5.1c|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Rear reflector missing (4.8.2 (a) (ii))1
Fuel cap ineffective (6.1.3 (b) (i))1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Front suspension assembly component excessively corroded. |2.3.1|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Fuel system component leaking |7.2.1a|1
Rear Steering linkage has excessive free play |2.2.2|1
Brake lever has inadequate reserve travel |3.1.3b|1
Stop lamp not working (4.3.1 (a) (ii))1
Brake cylinder leaking hydraulic fluid |3.2.B1e|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Front Stop lamp affected by the operation of another lamp |1.3.2|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Nearside Rear Direction indicator not working |1.5.1c|1
Front Horn not loud enough to be heard by another road user |1.7.3a|1
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Direction indicator not working |1.5.1c|1
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c|1
Hydraulic brake control feels spongy |3.1.4a|1
Front Direction indicator affected by the operation of another lamp |1.5.1c|1
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Throttle operating incorrectly |6.2.1f|1
Front Lower Steering headbearing has excessive free play |2.2.2|1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Offside Front Upper Throttle operating incorrectly |6.2.1f|1
Nearside Direction indicator not working (4.4.1 (a) (ii))1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Nearside Rear Upper Direction indicators not working |1.5.1c|1
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear suspension bearing excessively deteriorated |2.4A.2a|i||1
Nearside Rear Rear spring fractured |2.4.A1b|i||1
Horn not working |1.7.3a|1
Nearside Fairings insecure and likely to impede the steering |2.1.2e|1
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Rear Rear mono-shock pivot excessively worn |2.4.B.4|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy