Most common failures | No# failures |
---|
Headlamp aim out of alignment | 4 |
Offside Front Statutory seat belt missing |5.1.1| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Registration plate lamp issues | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Offside Front Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Front Leaf spring anchor pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
Nearside Front Leaf spring anchor pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
Front Bumper insecure (6.1.4 (a) (i)) | 1 |
Front Exhaust system insecure flexi (6.1.2 (a)) | 1 |
Offside Rear Brake valve inadequately mounted air tank straps ready to break x2 (1.1.7 (c)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marker where holes are (6.1.1 (c) (i)) | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked where holes are (6.1.1 (c) (i)) | 1 |
Nearside Rear Body component likely to become detached body frame (6.2.1 (a) (ii)) | 1 |
Offside Rear Body component likely to become detached body frame (6.2.1 (a) (ii)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount (5.3.6 (a) (i)) | 1 |
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength antiroll bar (5.3.6 (a) (i)) | 1 |
Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as advised to presenter/owner |6.1.1 |c| |i|| | 1 |
Offside Front Drag link end ball joint has excessive play as shown to presenter/owner |2.1.3 |b| |i|| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Shock absorber insecure |2.7.2b| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mounting |2.4.A.3| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Front Leaf spring anchor bracket bolt missing |2.4.B.6c| | 1 |
Nearside Rear Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
Offside Rear Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
Offside Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Brake load sensing valve defective and function impaired |3.6.E.3| | 1 |
Nearside Rear Brake servo locking device missing |3.6.A.2d| | 1 |
Offside All outline marker lamps with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
Nearside Front Emergency exit door cannot be opened from outside the vehicle |6.2.D.1a| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped-beam headlamps |1.2.3b| | 1 |
Nearside Rear Upper Leaf spring fractured |2.4.B.1a| | 1 |
Nearside Front Front position lamp|s| not in good working order |not working| |1.1.4a| | 1 |
Nearside Side repeater not in good working order |not working| |1.5.1b| | 1 |
Nearside Front Direction indicator not in good working order |not working| |1.5.1b| | 1 |
Headlamp not in good working order |not working| |1.2.4a| | 1 |
Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
Rear Position lamp not working lower lights (4.2.1 (a) (ii)) | 1 |
Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Offside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear Brake lining|s| insecure |3.5.1g| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside Front Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |