| Most common failures | No# failures |
|---|
| Rear brake binding | 22 |
| Headlamp aim out of alignment | 16 |
| Brake pipe excessively corroded | 13 |
| Registration plate lamp issues | 10 |
| Windscreen wiper does not clear the windscreen effectively | 8 |
| Offside front brake binding |3.7.B.1| | 7 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Brakes imbalanced across an axle | 5 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Horn not working |1.6.2a| | 4 |
| Nearside front brake binding |3.7.B.1| | 4 |
| Rear Fuel hose leaking |7.2.3| | 4 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Windscreen washer not working | 3 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Upper Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Fuel tank leaking |7.2.3| | 2 |
| Rear Fuel pipe leaking |7.2.3| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Headlamp not working on main beam |1.7.5a| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
| Rear brake application uneven | 2 |
| Fuel hose leaking |7.2.3| | 2 |
| Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 2 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Rear Mechanical brake component has restricted free movement | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Obligatory mirror missing |8.1.1| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Windscreen wiper not working |3.4 |a|| | 1 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded bulkhead (1.1.21 (e) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front Seat belt anchorage loose Seat insecure (7.1.1 (b)) | 1 |
| Nearside Rear Passengers seat backrest cannot be secured in the upright position. (6.2.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near top suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near Bulkhead seam (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Seal (5.3.6 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer |7.1.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Brake back plate|s| locking device insecure |3.5.1l| | 1 |
| Offside Rear Lower Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
| Registration plate issues | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Rear Fuel system component leaking |7.2.3| | 1 |
| Rear Exhaust mounting missing |7.1.1b| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Fuel pipe leaking |7.2.3| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Front Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Nearside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Offside Front All position lamps not working |1.1.A.3b| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Direction indicators not working |1.4.A.2c| | 1 |
| Emissions not tested |7.0| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Fuel pipe leaking |7.2.3| | 1 |
| Lower Headlamp insecure |1.7.3| | 1 |
| Offside Rear Trailing arm inappropriately repaired |2.4.A.2| | 1 |
| Offside rear brake juddering severely |3.7.A.5b| | 1 |
| Front brake application uneven | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Centre Exhaust mounting missing |7.1.1b| | 1 |
| Offside Front Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 1 |
| Nearside Headlamp insecure |4.1.1 |c|| | 1 |
| Rear Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Nearside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Offside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Rear brake caliper leaking |3.6.A.1| | 1 |
| Nearside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Front Electrical wiring inadequately supported |1.9.2a| | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Offside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of strut/ Inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Nearside Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
| Hazard warning lamps inoperative all |1.4.B.1b| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Brake servo insecurely mounted |3.6.A.2a| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Emissions not tested |7.3.A.1| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Rear Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 1 |
| Offside Front coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Rear Subframe mounting prescribed area is inadequately repaired Inner to outer sills |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is inadequately repaired Inner and outer sills |2.4.A.3| | 1 |
| Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Windscreen wiper blade insecure | 1 |
| Nearside Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Upper Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Steering arm has relative movement at its fixings idler etc? |2.2.B.1h| | 1 |
| Offside Rear Fuel hose leaking |7.2.3| | 1 |
| Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker turret mounting area + inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker turret mounting area + inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded floor (2.1.2 (e) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |