Most common failures | No# failures |
---|
Brake pipe excessively corroded | 16 |
Headlamp aim out of alignment | 10 |
Windscreen wiper does not clear the windscreen effectively | 9 |
Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
Brakes imbalanced across an axle | 4 |
Brake hose excessively deteriorated | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
Hazard warning switch faulty |1.4.B.1d| | 3 |
Registration plate lamp issues | 3 |
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Rear brake application uneven | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Rear fog lamp missing NOT FITTED TO OS |1.3.2a| | 1 |
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Windscreen has damage | 1 |
Exhaust has a major leak of exhaust gases tail pipe |7.1.2| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Registration plate issues | 1 |
Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Front brake application uneven | 1 |
Nearside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Side repeater missing |1.4.A.2b| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Offside Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Power steering pump leaking from a failed seal |2.3.3b| | 1 |
Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Anti-roll bar linkage cracked |2.4.G.1| | 1 |
Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Power steering component|s| leaking |2.3.3b| | 1 |
Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Shock absorber has negligible damping effect |2.7.5| | 1 |
Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Brake pipe inadequately supported |3.6.B.1| | 1 |
Front brake disc excessively scored |3.5.1h| | 1 |
Offside Rear coil spring fractured |2.4.C.1a| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Nearside rear parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
Nearside Rear coil spring broken |2.4.C.1a| | 1 |
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Windscreen wiper blade missing |8.2.2| | 1 |
Offside Front Macpherson strut insecure top mount rubber deteriated |2.4.G.1| | 1 |
Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Rear Shock absorber detached |2.7.2b| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Offside Front Headlamp insecure |1.7.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear parking brake recording little or no effort | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |