>

MOT History from tests of diesel NISSAN VANETTEs year 2005

Review the list of common NISSAN VANETTE failures below or to perform a specific mot history check on your NISSAN then use our popular KnowYourCar service

mot history
Pass percent:60.00%
(The average a diesel NISSAN VANETTE year 2005 passes without issue)
Based on:20 MOT Tests
Most common failuresNo# failures
Brake hose excessively deteriorated2
Brakes imbalanced across an axle2
Rear brake disc in such a condition that it is seriously weakened2
Service brake efficiency below requirements (1.2.2 (a) (i))2
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under sill (6.1.1 (c) (i))1
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Nearside Front Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a))1
Offside Front Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a))1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))1
Windscreen wiper does not clear the windscreen effectively1
Rear brake application uneven1
Driver`s airbag obviously defective |5.4.1|1
Nearside Front Brake hose inappropriately repaired both pipes insicure |3.6.A.3|1
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2|1
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2|1
Service brake: efficiency below requirements |3.7.B.7|1
Parking brake: efficiency below requirements |3.7.B.7|1
Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Offside Front Service brake excessively binding |1.2.1 |f||1
Offside Parking brake inoperative on one side |1.4.1 |a||1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Sill |5.3.6 |a| |i||1
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember |5.3.6 |a| |i||1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii||1
Service brake efficiency below requirements |1.2.2 |a| |i||1
Parking brake efficiency below requirements |1.4.2 |a| |i||1
Brake load sensing valve linkage defective and function impaired (1.1.17 (a))1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Body has a projection caused by damage |6.1.C.1|1
Brake pipe excessively corroded1
Front Exhaust has a major leak of exhaust gases |7.1.2|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy