Most common failures | No# failures |
---|
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 55 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 52 |
Windscreen wiper does not clear the windscreen effectively | 24 |
Registration plate lamp issues | 21 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 20 |
Headlamp aim out of alignment | 20 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 19 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 17 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Brakes imbalanced across an axle | 12 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 12 |
Exhaust has a major leak of exhaust gases |7.1.2| | 10 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 10 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 10 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Registration plate issues | 9 |
Brake hose excessively deteriorated | 8 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 8 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 7 |
Rear parking brake recording little or no effort | 6 |
Nearside Side repeater not working |1.4.A.2c| | 6 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Hazard warning switch faulty |1.4.B.1d| | 6 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Offside Front Direction indicator not working |1.4.A.2c| | 5 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Brake pipe excessively corroded | 5 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Offside Side repeater not working |1.4.A.2c| | 5 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Emissions not tested |7.0| | 5 |
Nearside Steering rack gaiter split |2.2.D.2d| | 5 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 5 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 5 |
Offside rear brake recording little or no effort |3.7.B.5a| | 4 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 4 |
Offside Steering rack gaiter split |2.2.D.2d| | 4 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Offside Front Side repeater not working |1.4.A.2c| | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 3 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Horn not working |1.6.2a| | 3 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Rear brake binding | 3 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 3 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
Offside Rear Rear fog lamp not working |1.3.2b| | 3 |
Rear brake application uneven | 3 |
Offside front brake binding |3.7.B.1| | 3 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 3 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Mechanical brake component has restricted free movement | 3 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Rear Exhaust system not adequately supported |7.1.1| | 3 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
Centre Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Front brake application uneven | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Front Exhaust mounting missing |7.1.1b| | 2 |
Nearside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 2 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 2 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front front brake binding |3.7.B.1| | 2 |
Nearside Front front brake binding |3.7.B.1| | 2 |
Nearside Front Headlamp insecure |1.7.3| | 2 |
Exhaust system not adequately supported |7.1.1| | 2 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 2 |
Rear Body insecure and dangerous to other road users |6.1.B.1b| | 2 |
Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 2 |
Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 2 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 2 |
Nearside Rear Stop lamp not working |1.2.1b| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear front parking brake recording little or no effort |3.7.B.6a| | 2 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 2 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 2 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
Battery insecure |1.9.1| | 2 |
Offside Front brake disc excessively pitted |3.5.1h| | 2 |
Offside Front coil spring fractured |2.4.C.1a| | 2 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 2 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Emissions not tested |8.2.1.2 |d|| | 2 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Front brake disc excessively scored |3.5.1h| | 1 |
Offside Front Braking system leaking |3.6.A.1| | 1 |
front brakes release unevenly |3.7.B.4| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Nearside Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
Offside Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 1 |
Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
Offside Side repeater obscured more than 50% |1.4.A.2d| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
Offside Front Mechanical brake component locking device missing brake hose locking clip missing |3.5.1l| | 1 |
Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Fuel system component insecure |7.2.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Rear Exhaust mounting missing |7.1.1b| | 1 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Position lamp switch does not illuminate the front and rear position lamps with a single operation |1.1.A.2| | 1 |
Nearside Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Rear brake drum contaminated by oil |3.5.1h| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Rear Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
Offside Rear position lamp|s| incomplete |1.1.4a| | 1 |
Offside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Nearside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front All position lamps not working |1.1.A.3b| | 1 |
Offside Front position lamp|s| insecure |1.1.A.3a| | 1 |
Nearside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Front Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Upper Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 1 |
Rear Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
Nearside Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired Sill to floor (5.3.6 (a) (i)) | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow (6.2.2 (d) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Exhaust emissions likely to be affected by an induction leak back box (8.2.1.1 (b)) | 1 |
Rear Subframe mounting prescribed area is severely distorted |2.4.A.3| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
Nearside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
Nearside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front All position lamps not working |1.1.A.3b| | 1 |
Nearside Rear Direction indicator incomplete |1.5.A1b| | 1 |
Rear Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Obligatory mirror missing |8.1.1| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
Offside Rear Direction indicator incomplete |1.5.A1b| | 1 |
Nearside Outer Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver`s seat |8.1.1d| | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Headlamp aim beam image too far to the right |1.6.B4| | 1 |
Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Headlamp insecure |1.7.3| | 1 |
Nearside Towbar component insecure |6.6.1| | 1 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Nearside Rear Outer Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Rear rear brake recording little or no effort Nearside and offside |3.7.B.5a| | 1 |
Driver`s door pillar deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front passenger door cannot be opened from outside the vehicle Handle broken |6.2.3 |a|| | 1 |
Nearside Rear Suspension arm pin or bush excessively worn Inner bush |5.3.4 |a| |i|| | 1 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust mounting missing |7.1.1b| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Stop lamp not working |1.2.1b| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
Offside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Offside Front Upper Headlamp not working on dipped beam |1.7.5a| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Offside Rear Seat belt stitching incomplete |5.2.2b| | 1 |
Nearside Front Front drive shaft damaged |2.5.C.2a| | 1 |
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Front Torque/reaction arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Torque/reaction arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Windscreen wiper not working |3.4 |a|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill end & wheel arch |2.4.A.3| | 1 |
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill end |2.4.A.3| | 1 |
Offside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Central Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
Nearside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Hazard warning lamps operated by more than one switch |1.4.B.1c| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Brake pipe leaking |3.6.A.1| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Offside Lower Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension spring mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension spring mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 1 |
Nearside Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Nearside Rear Braking system leaking |3.6.A.1| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |