| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 2 |
| Registration plate issues | 2 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 2 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar ball joint likely to become detached nut lose (5.3.4 (a) (ii)) | 1 |
| Parking brake lever ratchet not holding correctly (1.1.6 (a)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a) | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear Upper Suspension arm insecure and impairing directional stability locking nut missing (5.3.3 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system (burst during brake test) (1.1.11 (b) (ii)) | 1 |
| Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 1 |
| Emissions not tested (8.2.1.2 (d)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Rear Passengers seat backrest cannot be secured in the upright position. all rear seats (6.2.6 (a) (i)) | 1 |
| Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Rear Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn bushes deteriorated & not fully secure (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / floor area corroded & holed near front subframe mounting point (5.3.6 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s inner sill corroded & holed (6.1.1 (c) (i)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s outer sill corroded & holed (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s inner floor corroded & holed front & rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f inner wheel arch corroded & holed (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner wheel arch corroded & holed (6.1.1 (c) (i)) | 1 |
| Steering column universal joint insecure to the extent there is excessive movement at the mountings LOWER (2.1.3 (a) (ii)) | 1 |
| Steering column universal joint insecure to the extent there is excessive movement at the mountings lower pinch bolt loose (2.1.3 (a) (ii)) | 1 |
| Offside Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Nearside Rear Inner Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Rear Inner Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Nearside Front Power steering ram leaking (2.1.5 (a)) | 1 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Steering wheel likely to become detached (2.2.1 (b) (ii)) | 1 |
| Steering wheel rim loose (2.2.1 (c) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Offside Front Bumper insecure (6.1.4 (a) (i)) | 1 |
| Steering rack insecure movement in mountings (2.1.3 (a) (i)) | 1 |
| Rear fog lamp does not emit a steady red light orange (4.5.4 (a)) | 1 |
| Drivers view of an obligatory external mirror significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Offside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached Split pin missing from ball joint. (5.3.4 (a) (ii)) | 1 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn inner bush (5.3.4 (a) (i)) | 1 |
| Emissions not tested vehicle missfiring and running 6% (8.2.1.2 (d)) | 1 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure nut lose on tie rod (5.3.3 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn small arm (5.3.4 (a) (i)) | 1 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits lambda reading to high (8.2.1.2 (c)) | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits co reading to high (8.2.1.2 (b)) | 1 |