| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Windscreen wiper does not clear the windscreen effectively | 11 |
| Registration plate lamp issues | 9 |
| Rear parking brake recording little or no effort | 6 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Brake pipe excessively corroded | 5 |
| Brakes imbalanced across an axle | 3 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
| Offside Stop lamp not working |1.2.1b| | 3 |
| Offside Headlamp not working on main beam |1.7.5a| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 2 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Windscreen has damage | 1 |
| Front brake application uneven | 1 |
| Emissions not tested timing chain noisy , low on oil |7.3.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre inner sill |5.2.6| | 1 |
| Windscreen wiper blade insecure | 1 |
| Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Front coil spring fractured |2.4.C.1a| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Rear Exhaust has a part missing |7.1.1a| | 1 |
| Rear Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front coil spring broken |2.4.C.1a| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Front Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Registration plate issues | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Outer Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Offside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Headlamp insecure |1.7.3| | 1 |
| Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| rear brakes release unevenly |3.7.B.4| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Service brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is severely distorted floor |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded seat belt mount corroded to excess |5.2.6| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Front Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to inner sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
| Rear brake application uneven | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases SILENCER. (6.1.2 (a)) | 1 |
| Emissions unable to be completed DUE TO EXHAUST LEAK. (8.2.1.2 (d)) | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH SILL END. (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH SILL END. (6.1.1 (c) (i)) | 1 |
| Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CROSS MEMBER. (6.1.1 (c) (i)) | 1 |