Most common failures | No# failures |
---|
Headlamp aim out of alignment | 29 |
Brake pipe excessively corroded | 11 |
Windscreen wiper does not clear the windscreen effectively | 10 |
Rear parking brake recording little or no effort | 5 |
Offside Stop lamp not working |1.2.1b| | 4 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Registration plate lamp issues | 4 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Nearside Stop lamp not working |1.2.1b| | 4 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Rear brake binding | 3 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 3 |
Brakes imbalanced across an axle | 3 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Registration plate issues | 2 |
Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Windscreen wiper blade insecure | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Centre Rear fog lamp not working |1.3.2b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Front Lower Suspension arm has excessive play in a pin/bush front |2.4.G.2| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Obligatory mirror missing |8.1.1| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Side repeater missing |1.4.A.2b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Seat belt anchorage prescribed area strength or continuity significantly reduced Both sides rear, under wheel arches |7.1.1 |a| |i|| | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both sides rear inner and outer sills |5.3.6 |a| |i|| | 1 |
Bonnet cannot be secured in the closed position |3.1 |b| |i|| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Centre Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear inner sills |6.1.1 |c| |i|| | 1 |
Windscreen wiper not working |3.4 |a|| | 1 |
Front brake application uneven | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |