Most common failures | No# failures |
---|
Brake pipe excessively corroded | 27 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 9 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 9 |
Headlamp aim out of alignment | 9 |
Windscreen wiper does not clear the windscreen effectively | 8 |
Registration plate lamp issues | 8 |
Offside Steering rack gaiter split |2.2.D.2d| | 7 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Steering rack gaiter split |2.2.D.2d| | 5 |
Rear brake binding | 5 |
Registration plate issues | 5 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 5 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Rear Brake load sensing valve linkage seized |3.6.E.3| | 3 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Nearside Rear Brake load sensing valve linkage seized |3.6.E.3| | 2 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Rear brake disc excessively pitted |3.5.1h| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Emissions not tested |7.0| | 2 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside brake disc excessively pitted |3.5.1h| | 1 |
Offside brake disc excessively pitted |3.5.1h| | 1 |
Offside Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
front brake binding |3.7.B.1| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Hazard warning switch insecure |1.4.B.1d| | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Offside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Lower Suspension arm insecure |2.4.G.1| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Front Position lamp adversely affected by the operation of another lamp headlamp comes on with side lamp |4.2.3 |c|| | 1 |
Offside Front Position lamp adversely affected by the operation of another lamp headlamp comes on with side lamp |4.2.3 |c|| | 1 |
Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Outer Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Outer Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Front position lamp|s| adversely affected by the operation of another lamp head lamp comes on when side light is turn on |1.1.A.3f| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Outer Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Outer Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Headlamp not in good working order |not working| |1.2.4a| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Centre Stop lamp not working |1.2.1b| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Nearside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Tie bar/rod synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Rear Exhaust mounting missing |7.1.1b| | 1 |
Upper Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
Offside Outer Stop lamp not working |1.2.1b| | 1 |
Offside Outer Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Inner Rear Exhaust mounting missing |7.1.1b| | 1 |
Nearside Rear Statutory seat belt missing |5.1.1| | 1 |
Offside Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Front Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
Windscreen has damage | 1 |
Front Steering system excessively tight |2.2.D.1| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Lower Radius arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |