Most common failures | No# failures |
---|
Brake pipe excessively corroded | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Registration plate lamp issues | 2 |
Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
Windscreen has damage | 2 |
Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Headlamp aim out of alignment | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Rear parking brake recording little or no effort | 2 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Front Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Rear rear brake grabbing severely |3.7.A.5b| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Rear Towbar component excessively corroded |6.6.1| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Registration plate issues | 1 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |