Most common failures | No# failures |
---|
Headlamp aim out of alignment | 143 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 135 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 117 |
Brake hose excessively deteriorated | 88 |
Windscreen wiper does not clear the windscreen effectively | 86 |
Brake pipe excessively corroded | 78 |
Registration plate lamp issues | 59 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 38 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 36 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 32 |
Brakes imbalanced across an axle | 32 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 32 |
Parking brake: efficiency below requirements |3.7.B.7| | 32 |
Rear parking brake recording little or no effort | 29 |
Registration plate issues | 29 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 28 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 27 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 26 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 26 |
Offside Steering rack gaiter split |2.2.D.2d| | 26 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 24 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
Rear fog lamp switch faulty |1.3.1a| | 21 |
Offside Rear fog lamp not working |1.3.2b| | 21 |
Exhaust has a major leak of exhaust gases |7.1.2| | 20 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 20 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 20 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 20 |
Offside Stop lamp not working |1.2.1b| | 19 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 19 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 18 |
Rear Exhaust system not adequately supported |7.1.1| | 18 |
Nearside Stop lamp not working |1.2.1b| | 18 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 18 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 16 |
Nearside Side repeater not working |1.4.A.2c| | 16 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Rear brake application uneven | 16 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 15 |
Offside front brake binding |3.7.B.1| | 15 |
Horn not working |1.6.2a| | 15 |
Nearside Headlamp not working on main beam |1.7.5a| | 15 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 15 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 15 |
Offside Headlamp not working on dipped beam |1.7.5a| | 14 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 14 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
Offside Side repeater not working |1.4.A.2c| | 14 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 14 |
Offside rear brake recording little or no effort |3.7.B.5a| | 13 |
Offside Front position lamp|s| not working |1.1.A.3b| | 13 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 13 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 13 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
Nearside front brake binding |3.7.B.1| | 12 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 12 |
Offside Headlamp not working on main beam |1.7.5a| | 11 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
Rear fog lamp tell tale not working |1.3.1b| | 10 |
Service brake: efficiency below requirements |3.7.B.7| | 9 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 9 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 8 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 8 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 7 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Offside Rear Rear fog lamp not working |1.3.2b| | 7 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 7 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 7 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 7 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 6 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 6 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 6 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 5 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 5 |
Exhaust system not adequately supported |7.1.1| | 5 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 5 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 5 |
Offside Front front brake binding |3.7.B.1| | 5 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 5 |
Nearside Rear Stop lamp not working |1.2.1b| | 5 |
Rear Rear fog lamp not working |1.3.2b| | 5 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 5 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 5 |
Nearside Front All position lamps not working |1.1.A.3b| | 5 |
Nearside Front Direction indicator not working |1.4.A.2c| | 5 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 5 |
Rear brake binding | 5 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 5 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 5 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 5 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 5 |
Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
Nearside Headlamp insecure |1.7.3| | 4 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 4 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Emissions not tested |7.0| | 4 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
Offside Front Headlamp not working on main beam |1.7.5a| | 4 |
Centre Exhaust system not adequately supported |7.1.1| | 4 |
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 4 |
Nearside Rear Braking system leaking |3.6.A.1| | 4 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Rear Stop lamp not working |1.2.1b| | 3 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Rear Mechanical brake component has restricted free movement | 3 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Front Direction indicator not working |1.4.A.2c| | 3 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Rear fog lamp not working |1.3.2b| | 3 |
Offside Front Side repeater not working |1.4.A.2c| | 3 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Nearside Front Side repeater not working |1.4.A.2c| | 3 |
Offside Rear Braking system leaking |3.6.A.1| | 3 |
Front brake application uneven | 3 |
Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 3 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 3 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear wheel bearing has excessive play |2.6.2| | 3 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Nearside Front front brake binding |3.7.B.1| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 3 |
Brake hose damaged | 3 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 3 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 3 |
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Rear Exhaust mounting missing |7.1.1b| | 3 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 3 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Nearside Front Body insecure and dangerous to other road users |6.1.B.1b| | 3 |